ZB4-BW113
현행 제품22mm White Illuminated Projecting Pushbutton Head (ZB4)
Schneider XB4 illuminated white push button head.
일반적인 용도
White illuminated for neutral status. Metal bezel with 24V LED. The complete illuminated XB4 color range: green (BW333), red (BW343), yellow (BW353), blue (BW363), white (BW113).
사양 목록
|
Actuator Type
The button head style. Flush sits level with the bezel (prevents accidental presses). Extended protrudes for easy access.
|
Projecting
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA, CE; marine BV/DNV/GL/LR/RINA
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
White
|
|
Component type
|
Head (operator) — complete unit is XB4-BW…
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22mm
|
|
Illumination
Whether the button has a built-in light. Illuminated buttons show status (lit = active).
|
Illuminated-type (universal LED light block ordered separately)
|
|
IP Rating
IP69K: Dust-tight and withstands high-pressure, high-temperature steam jets. Built for food processing washdown environments.
|
IP66/IP69/IP69K
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
Chromium-plated metal bezel
|
설치 빠른 참조
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
외형 치수
문제 해결
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
구매처
가격 범위
$11.4 — $46.16
3개 대리점
주요 사양
- Actuator Type
- Projecting
- Certifications
- UL, CSA, CE; marine BV/DNV/GL/LR/RINA
- Color
- White
- Component type
- Head (operator) — complete unit is XB4-BW…
- Cutout Diameter
- 22mm
사용자 후기
“White illuminated for neutral status. Metal bezel with 24V LED. The complete illuminated XB4 color range: green (BW333), red (BW343), yellow (BW353), blue (BW363), white (BW113).”
