XB4BW35B55
현행 제품Schneider Electric XB4BW35B55
Pushbutton Switches Illuminated push button, Harmony XB4, metal, orange flush, 22mm, universal LED, plain lens, 1NO+1NC, 24V AC DC, push in
연구 노트
1. What this is
XB4BW35B55 is a Schneider Electric Harmony XB4 complete 22mm pushbutton with chrome-plated METAL bezel and metal mounting collar (industrial IEC command switch).
2. Part-number decode
- Series: Harmony XB4
- Panel cutout: 22mm
- Bezel material: Metal
- Type: complete unit
- Illuminated: yes (integral LED/lamp)
3. Compatibility & ordering
Schneider's Harmony (22/16mm) and Square D Class 9001 (30mm) are the reference IEC/US command-switch ranges. This is a complete, pre-assembled device (operator + contact block). Match by size (16/22/30mm), bezel material (metal XB4/ZB4 vs plastic XB5/ZB5), function (pushbutton/selector/indicator/E-stop), colour, illumination, and contact arrangement; cross-reference to Allen-Bradley 800F/800T, Siemens 3SU, IDEC HW, or Eaton M22 by the same attributes if needed.
4. Data-quality note
The Schneider series, bezel material, size, and component type are decoded from the part number (grounded in the se.com Harmony catalog and distributor listings). The exact colour and contact arrangement are encoded in the remaining digits and depend on the sub-family — confirm against the Schneider datasheet for a precise order (not guessed here).
5. Sources
- Schneider Electric Harmony / Square D Class 9001 catalog (se.com)
- Distributor listing (Rexel / Mouser / Newark) — search the exact part number
출처
- Schneider Electric — XB4BW35B55 — se.com
Harmony XB4 제품군 소개
제품 라인 전체에 적용되며, XB4BW35B55에만 국한되지 않습니다.
제품 라인업
Harmony XB4는 Schneider Electric의 22mm 금속 푸시버튼, 셀렉터 스위치, 키 스위치, 비상 정지 버튼 및 파일럿 라이트 제품군으로, 크롬 도금(또는 블랙) 금속 베젤이 특징입니다. 이전 모델과 많은 판매처에서는 여전히 Telemecanique 명칭을 사용합니다. 동일한 기능이 30mm 플러시 장착 버전(XB4F / ZB4F)과 Harmony XB5(플라스틱, 이중 절연 버전)으로도 제공됩니다.
부품 번호 체계
- 완전한 유닛 = 본체 + 헤드. XB4BA31은 본체(ZB4BZ101)와 헤드(ZB4BA3)로 구성됩니다. 별도로 고정 칼라(ZB4BZ009), 접점 블록(ZBE101), 헤드를 구매할 수도 있습니다.
- 한 글자로 장착 방식 구분: ZB4B…는 표준 22mm 헤드, ZB4F…는 30mm 플러시 버전(ZB4BA3 → ZB4FA3)입니다.
- 블랙 금속 베젤: 헤드 번호 끝에 7을 추가(ZB4BD2 → ZB4BD27).
- 푸시인 단자: 끝자리가 5인 완제품은 컴팩트 푸시인 접점 블록 사용(XB4BD335 대신 XB4BD33).
- 셀렉터 헤드: ZB4BD2 2위치 유지형; ZB4BD4 2위치, 우측에서 좌측으로 스프링 리턴; ZB4BD3 3위치 유지형; ZB4BD5 중앙으로 스프링 리턴; ZB4BD7 / ZB4BD8 좌측 / 우측에서 중앙으로 스프링 리턴. D 대신 J는 긴 핸들(ZB4BJ3), G는 키 스위치, K는 조명식 셀렉터입니다.
- 파일럿 라이트: BV 다음 글자는 전압(B = 24V, G = 110–120V, M = 230–240V); 마지막 숫자는 색상입니다.
본체와 접점 블록
| 본체(접점 포함) | 접점 | 접점 블록 | 유형 | |
|---|---|---|---|---|
| ZB4BZ101 | 1 NO | ZBE101 | NO | |
| ZB4BZ102 | 1 NC | ZBE102 | NC | |
| ZB4BZ103 | 2 NO | ZBE203 / ZBE204 / ZBE205 | 더블: 2 NO / 2 NC / NO + NC | |
| ZB4BZ104 | 2 NC | ZBE1016 / ZBE1026 | 저전력(전자 입력용) | |
| ZB4BZ105 | 1 NO + 1 NC | ZBE201 / ZBE202 | 조조폐쇄 NO / 만개 NC | |
| ZB4BZ141 | 1 NO + 2 NC | ZBE501–ZBE505 | 고전력 스위칭 |
접점 블록은 최대 3열까지 장착 가능합니다. 조명식 유닛은 Universal LED 라이트 블록(ZBVB1 24V, ZBVG1 110–120V, ZBVM1 230–240V, "UN" 표기)을 사용하며, 하나의 블록으로 모든 렌즈 색상에 대응 가능합니다.
전체 라인업 사양(Schneider 카탈로그, 2026년 1월)
- IP66, IP67, IP69, IP69K 및 UL Type 4X; 충격 IK06(플라스틱 XB5: IK03)
- −40 ~ +70°C; 푸시버튼 최대 1천만 회 동작
- 22mm 구멍, 회전 방지 노치 유무 선택 가능; 패널 두께 1–6mm
- IEC, UL, CSA, CCC, EAC, JIS; 선박 인증(BV, Lloyd's Register, DNV)
개별 데이터시트는 이와 다를 수 있습니다. 예를 들어 XB4BD33 셀렉터는 100만 회 사이클 등급입니다.
설치 방법
헤드는 패널 구멍에 자체 고정되므로 1인 작업이 가능합니다. 본체는 후면에서 클립으로 고정되고 나사로 조입니다(0.8 N·m, 최대 1.2 N·m). 플라스틱 XB5와 달리 너트가 없으며, XB5의 너트는 ZB5AZ905 공구로 조입니다. 단자는 0.34–1.5 mm²(AWG 22–16) 전선을 수용하며, 단자당 2가닥, 0.8–1.2 N·m로 조입니다. Schneider에 따르면 풀림 방지 단자 나사는 주기적인 재조임이 필요 없습니다. 본체를 제거하려면 검은색 탭에 평 드라이버를 넣고 뒤로 당기면 됩니다.
유용한 액세서리
- 레전드 홀더 ZBZ32(30 × 40mm)와 인쇄 레전드(ZBY2385 "AUTO-O-HAND", ZBY2186 "I-O-II", ZBY2178 "O-I", ZBY2303 "START", ZBY2304 "STOP"); ZBY2101은 각인용 공란입니다.
- 가드: ZBZ2102 셀렉터 및 키 스위치용 플라스틱 가드; ZBZ1605 비상 정지 버튼용 금속 가드(자물쇠 가능)
- 블랭킹 플러그 ZB4SZ3(칼라 ZB4BZ009 포함)으로 미사용 구멍 처리; 헤드 아래 액체 분사 세척기 ZB4BZ007
- 30mm 플러시 키트 ZB4BZ021(푸시버튼, 파일럿 라이트) 및 ZB4BZ022(셀렉터, 조명식 푸시버튼)
금속 XB4 vs 플라스틱 XB5?
동일한 기능을 하며 22mm 구멍에 호환됩니다. 충격, 진동, 고온(예: 용접 스패터)에는 금속을, 이중 절연과 저가형에는 플라스틱을 선택하세요. Schneider China에서는 XB4는 수입 전용인 반면 XB5는 현지 생산된다고 합니다. 더 저렴한 라인업은 Easy Harmony XA2(금속)와 XB2 / XB7입니다.
구매 시 참고 사항
- 유사품: 많은 마켓플레이스 리스팅에서 XB4 코드를 무명 복제품에 사용하며, 공장 가격은 개당 약 $1입니다. 한 판매자의 "고품질 위조품"과 정품 접점 블록 비교 영상에서 복제품의 NO 접점이 연속성 테스트에서 끊기는 모습이 확인되었습니다. 공인 유통업체에서 구매하고 Schneider 마킹을 확인하세요.
- IP66 vs IP67/IP69K: 카탈로그 섹션 제목은 전체 제품군에 IP66을 표기하는 반면, 개별 부품 데이터시트에는 IP67, IP69, IP69K가 기재됩니다. 판매처는 둘 중 하나를 복사합니다.
- 단종 및 누락 코드: XB4BD73(2022년 1월)과 같은 일부 완제품은 더 이상 생산되지 않습니다. 헤드는 대개 여전히 판매되므로 헤드 + 본체로 조립 가능합니다.
- 사용 중 문제점: 저희가 확인한 포럼과 리뷰에서는 이 제품군의 반복적인 고장 패턴을 찾지 못했습니다. 발견된 불만은 위조품과 잘못된 리스팅에 관한 것이었습니다.
출처
- Harmony XB4 metal Control and signaling units catalog (DIA5ED2121212EN, January 2026) — Schneider Electric
- Instruction sheet XB4/XB5 - mounting and tightening torques (BRU46063) — Schneider Electric
- XB4BD73 - discontinued on 27 January 2022 — Schneider Electric
- FAQ FA421338: difference between XB4 and XB5 (2022) — Schneider Electric China
- Pulsadores Schneider Harmony XB4 y XB5 (IK06 vs IK03, ratings) — Schneider Electric Latinoamérica, YouTube, 2019
- Botonería Harmony XB4 y XB5 - how to choose — Dominio Electric, YouTube, 2024
- Mounting Tutorial: Harmony XB4/ZB4 22 mm Pushbutton & Contacts — RS Americas, YouTube, 2020
- How to Spot Counterfeit Schneider XB4 Push Buttons (seller's demo) — Alara, YouTube, 2026
사양 목록
|
Bezel material
|
metal
|
|
Component type
|
complete unit
|
|
Enriched by
|
schneider-decoder-2026-08-12
|
|
Illuminated
|
true
|
|
Lead time
|
0 Days
|
|
Manufacturer series
|
Harmony XB4
|
|
Mouser part number
|
996-XB4BW35B55
|
|
Panel cutout
|
22mm
|
|
Pn status
|
decoded
|
|
Wireless Range
Maximum wireless range in open air. Walls and interference reduce this significantly.
|
Harmony / Square D Class 9001
|
|
Rohs status
|
RoHS Compliant
|
|
Series description
|
Schneider Harmony XB4 complete 22mm pushbutton with chrome-plated METAL bezel and metal mounting collar (industrial IEC command switch)
|
설치 빠른 참조
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
외형 치수
문제 해결
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
주요 사양
- Bezel material
- metal
- Component type
- complete unit
- Enriched by
- schneider-decoder-2026-08-12
- Illuminated
- true
- Lead time
- 0 Days