ZB4FA16

現行品

Schneider Electric ZB4FA16

型番: ZB4 - A - 1
Schneider Electric ZB4FA16 — Schneider Electric ZB4FA16

Pushbutton Switches FLUSH WH CAPS PB HEAD RECESSED

研究ノート

1. What this is

ZB4FA16 is a Schneider Electric Harmony ZB4 22mm METAL-bezel modular component (operator head OR contact block, for user assembly into an XB4 device).

2. Part-number decode

  • Series: Harmony ZB4
  • Panel cutout: 22mm
  • Bezel material: Metal
  • Type: head/block (modular)

3. Compatibility & ordering

Schneider's Harmony (22/16mm) and Square D Class 9001 (30mm) are the reference IEC/US command-switch ranges. This is a modular component — a Harmony/9001 device is assembled from an operator head + mounting collar + contact/light block(s). Confirm you have the matching head and blocks for a complete device. Match by size (16/22/30mm), bezel material (metal XB4/ZB4 vs plastic XB5/ZB5), function (pushbutton/selector/indicator/E-stop), colour, illumination, and contact arrangement; cross-reference to Allen-Bradley 800F/800T, Siemens 3SU, IDEC HW, or Eaton M22 by the same attributes if needed.

4. Data-quality note

The Schneider series, bezel material, size, and component type are decoded from the part number (grounded in the se.com Harmony catalog and distributor listings). The exact colour and contact arrangement are encoded in the remaining digits and depend on the sub-family — confirm against the Schneider datasheet for a precise order (not guessed here).

5. Sources

  • Schneider Electric Harmony / Square D Class 9001 catalog (se.com)
  • Distributor listing (Rexel / Mouser / Newark) — search the exact part number

出典
  1. Schneider Electric — ZB4FA16 — se.com
Harmony XB4シリーズについて

シリーズ全体に適用され、ZB4FA16 のみに限りません。

製品ラインについて

Harmony XB4は、Schneider Electricの金属製22 mmプッシュボタン、セレクタスイッチ、キースイッチ、非常停止スイッチ、パイロットランプのシリーズで、クロムメッキ(または黒色)の金属製ベゼルを備えています。古い部品や多くの店舗では、Telemecaniqueの名称がまだ使用されています。同じ機能を持つ30 mm埋め込み型バージョン(XB4F / ZB4F)も存在し、Harmony XB5はこのシリーズのプラスチック製、二重絶縁の双生児です。

品番の構成

  • 完全なユニット = ボディ + ヘッド。 XB4BA31はボディとその接点(ZB4BZ101)にヘッド(ZB4BA3)を加えたものです。また、固定カラーZB4BZ009、接点ブロックZBE101、ヘッドの3つの部品を個別に購入することもできます。
  • 1文字で取り付け方法が変わる: ZB4B…は標準の22 mmヘッド、ZB4F…は30 mm埋め込み型(ZB4BA3 → ZB4FA3)。
  • 黒色金属ベゼル: ヘッドに7を追加(ZB4BD2 → ZB4BD27)。
  • プッシュイン端子: 末尾が5の完全ユニットはコンパクトなプッシュイン接点ブロックを使用(XB4BD335の代わりにXB4BD33)。
  • セレクターヘッド: ZB4BD2は2位置固定、ZB4BD4は2位置で右から左にスプリングリターン、ZB4BD3は3位置固定、ZB4BD5は中央にスプリングリターン、ZB4BD7 / ZB4BD8は左 / 右から中央にスプリングリターン。JはDの代わりに長いハンドル(ZB4BJ3)、Gはキースイッチ、Kはイルミネーション付きセレクター。
  • パイロットランプ: BVの後の文字は電圧(B = 24 V、G = 110–120 V、M = 230–240 V)、最後の数字は色を示します。

ボディと接点ブロック

接点付きボディ接点接点ブロックタイプ
ZB4BZ1011 NOZBE101NO
ZB4BZ1021 NCZBE102NC
ZB4BZ1032 NOZBE203 / ZBE204 / ZBE205ダブル: 2 NO / 2 NC / NO + NC
ZB4BZ1042 NCZBE1016 / ZBE1026低電力(電子入力)
ZB4BZ1051 NO + 1 NCZBE201 / ZBE202早期接続NO / 遅延切断NC
ZB4BZ1411 NO + 2 NCZBE501–ZBE505高電力スイッチング

接点ブロックは最大3列にクリップで取り付けられます。イルミネーション付きユニットはユニバーサルLEDライトブロック(ZBVB1 24 V、ZBVG1 110–120 V、ZBVM1 230–240 V、「UN」マーク付き)を使用します。1つのブロックで全てのレンズ色に対応します。

全シリーズの定格(Schneiderカタログ、2026年1月)

  • IP66、IP67、IP69、IP69KおよびUL Type 4X;衝撃IK06(プラスチックXB5:IK03)
  • −40から+70 °C;プッシュボタンで最大1000万回操作
  • 22 mm穴、回転防止ノッチ有無;パネル厚1–6 mm
  • IEC、UL、CSA、CCC、EAC、JIS;船舶認証(BV、Lloyd's Register、DNV)

個別のデータシートはこれらのシリーズ数値と異なる場合があります。例えば、XB4BD33セレクターは100万回サイクルの定格です。

取り付け

ヘッドはパネル穴に固定されるため、1人で取り付け可能です。ボディは後ろからクリップで取り付けられ、ネジで固定されます(0.8 N·m、最大1.2 N·m);プラスチックXB5とは異なり、ナットはありません。XB5のナットは工具ZB5AZ905で締めます。端子は0.34–1.5 mm²(AWG 22–16)、1端子に2本の線、0.8–1.2 N·mで接続します。Schneiderによると、緩み防止端子ネジは定期的な再締めは不要です。ボディを取り外すには、平らなドライバーを黒いタブに入れて引っ張ります。

便利なアクセサリ

  • レジェンドホルダー ZBZ32(30 × 40 mm)に印刷されたレジェンド、例:ZBY2385 "AUTO-O-HAND"、ZBY2186 "I-O-II"、ZBY2178 "O-I"、ZBY2303 "START"、ZBY2304 "STOP";ZBY2101は彫刻用のブランク
  • ガード: ZBZ2102プラスチックガード(セレクターとキースイッチ用);ZBZ1605金属ガード(非常停止スイッチ用、ロック可能)
  • ブランキングプラグ ZB4SZ3(カラーZB4BZ009付き)未使用の穴用;液体スプレー用ワッシャー ZB4BZ007(ヘッド下)
  • 30 mm埋め込みキット ZB4BZ021(プッシュボタン、パイロットランプ)およびZB4BZ022(セレクター、イルミネーション付きプッシュボタン)

金属XB4またはプラスチックXB5?

同じ仕事をし、同じ22 mm穴に適合します。衝撃、振動、熱(例:溶接スパッタ)に対しては金属を、二重絶縁と低価格を求める場合はプラスチックを選択します。両方とも高IPバージョンがあります。Schneider中国では、XB4は輸入品のみで、XB5は現地生産もされています。Schneiderのより安価なシリーズはEasy Harmony XA2(金属)およびXB2 / XB7です。

購入時の注意点

  • 類似品: 多くのマーケットプレイスリストでは、XB4コードが無銘のコピー品に使用され、工場価格は1個約1ドルです。ある販売者のビデオでは、「高品質の偽物」と本物の接点ブロックを比較し、コピー品のNO接点が導通テストで切断される様子を示しています。正規販売店から購入し、Schneiderのマーキングを確認してください。
  • IP66 vs IP67/IP69K: カタログのセクションヘッダーでは、製品全体のグループに対してIP66を引用していますが、個別部品のデータシートではIP67、IP69、IP69Kがリストされています。店舗はどちらかの数値をコピーします。
  • 廃盤および欠番: 一部の完全ユニットは製造中止されています(例:XB4BD73、2022年1月)。ヘッドは通常まだ販売されているため、ヘッド + ボディからスイッチを組み立てることができます。
  • 使用中の問題: 私たちが読めるフォーラムやレビューでは、このシリーズに繰り返し発生する故障パターンは見つかりませんでした。見つかった苦情は、偽物と誤ったリストに関するものでした。
出典
  1. Harmony XB4 metal Control and signaling units catalog (DIA5ED2121212EN, January 2026) — Schneider Electric
  2. Instruction sheet XB4/XB5 - mounting and tightening torques (BRU46063) — Schneider Electric
  3. XB4BD73 - discontinued on 27 January 2022 — Schneider Electric
  4. FAQ FA421338: difference between XB4 and XB5 (2022) — Schneider Electric China
  5. Pulsadores Schneider Harmony XB4 y XB5 (IK06 vs IK03, ratings) — Schneider Electric Latinoamérica, YouTube, 2019
  6. Botonería Harmony XB4 y XB5 - how to choose — Dominio Electric, YouTube, 2024
  7. Mounting Tutorial: Harmony XB4/ZB4 22 mm Pushbutton & Contacts — RS Americas, YouTube, 2020
  8. How to Spot Counterfeit Schneider XB4 Push Buttons (seller's demo) — Alara, YouTube, 2026

仕様一覧

Bezel material
metal
Component type
head/block (modular)
Enriched by
schneider-decoder-2026-08-12
Lead time
0 Days
Manufacturer series
Harmony ZB4
Mouser part number
996-ZB4FA16
Panel cutout
22mm
Pn status
decoded
Wireless Range
Harmony / Square D Class 9001
Rohs status
RoHS Compliant
Series description
Schneider Harmony ZB4 22mm METAL-bezel modular component (operator head OR contact block, for user assembly into an XB4 device)

取付クイックリファレンス

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

外形寸法

トラブルシューティング

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

写真と図面

画像: mouser.com

主要仕様

Bezel material
metal
Component type
head/block (modular)
Enriched by
schneider-decoder-2026-08-12
Lead time
0 Days
Manufacturer series
Harmony ZB4