Schneider Electric · Harmony XB5 シリーズ

XB5-AA31

現行品
UL CSA CE

22mm Green Flush Push Button Plastic XB5 1NO

型番: A - A - 3
Schneider Electric Harmony XB5 シリーズ

XB5 — the budget plastic version of XB4.

主な用途

Plastic bezel instead of chrome metal. 30-40% cheaper than XB4. Same 22mm mounting, same contact blocks. Use for indoor panels where cosmetics dont matter.

仕様一覧

Actuator Type
Flush
Certifications
UL, CSA, CE
Color
Green
Contact Configuration
1NO
Cutout Diameter
22mm
IP Rating
IP66
Material
Plastic

取付クイックリファレンス

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

外形寸法

Front 22mm cutout panel hole diameter Side panel contact ~45mm depth

配線図

L T 11 12 NO (open) press ↓

トラブルシューティング

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

主要仕様

Actuator Type
Flush
Certifications
UL, CSA, CE
Color
Green
Contact Configuration
1NO
Cutout Diameter
22mm

ユーザーの声

+

“Schneider Electric XB5-AA31 — Plastic bezel instead of chrome metal. 30-40% cheaper than XB4. Same 22mm mounting, same contact blocks. Use for indoor panels where cosmetics dont ma”

Reddit r/PLC 13 高評価 スレッドを見る →