XB4-BVG6-230
AktivníSchneider XB4BVG6 Blue Pilot Light 110-120V AC (Harmony XB4)
Schneider XB4 green pilot light for 230V AC circuits.
Běžné aplikace
For European 230V panels where 24V is not available. Connects directly to mains voltage. Same XB4 quality, different LED module. Important: verify voltage before installing — 24V and 230V modules look identical from outside.
Specifikace
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA, CE
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Blue
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22mm
|
|
Device type
|
Harmony XB4 complete pilot/indicator light (status, NOT a pushbutton)
|
|
IP Rating
IP69K: Dust-tight and withstands high-pressure, high-temperature steam jets. Built for food processing washdown environments.
|
IP66 / IP69K
|
|
LED Voltage
The voltage required for the built-in LED. Must match your control circuit voltage (typically 24V DC or 230V AC).
|
110-120V AC
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
Metal
|
|
Pn note
|
Corrected: XB4BVG6 = BLUE, 110-120V AC (se.com). Was mislabeled green/230V (bogus -230 suffix). XB4-BV code: voltage B=24V/G=110-120V/M=230-240V; color 6=blue/3=green.
|
|
Pn status
|
color+voltage-corrected
|
Stručný průvodce instalací
Panel cutout: 22mm. Insert from the front, secure with mounting nut.
LED module: Check the voltage rating matches your supply (typically 24V DC or 230V AC). Connect to PLC digital output or relay contact for status indication.
Color meaning (IEC 60204-1): Green = normal/running. Red = fault/danger. Yellow = warning/caution. Blue = mandatory action. White = neutral/general.
Rozměry
Řešení problémů
Light is dim or flickering
Check supply voltage matches the LED module rating. Low voltage causes dimming. If voltage is correct, the LED module is failing — replace it. LED modules have finite life (typically 50K-100K hours).
Light doesn't turn on
Verify voltage at the terminals with a multimeter. Check the PLC output or relay driving the light. LED modules are polarity-sensitive on DC circuits — try reversing the leads.
Kde koupit
Cenové rozpětí
$107.1 — $246.82
u 2 distributorů
Stručné specifikace
- Certifications
- UL, CSA, CE
- Color
- Blue
- Cutout Diameter
- 22mm
- Device type
- Harmony XB4 complete pilot/indicator light (status, NOT a pushbutton)
- IP Rating
- IP66 / IP69K
Co říkají uživatelé
“For European 230V panels where 24V is not available. Connects directly to mains voltage. Same XB4 quality, different LED module. Important: verify voltage before installing — 24V and 230V modules look”