3SU10000AB200AD0

在产

Siemens 3SU10000AB200AD0

零件编号: 3SU1 - 0 - 20
Siemens 3SU10000AB200AD0 — Siemens 3SU10000AB200AD0

Switch Actuators PUSHBUTTON, MOM, RED, FLUSH

研究笔记

1. What this is

3SU10000AB200AD0 is a Siemens SIRIUS ACT 3SU1 22mm modular command switch. 3SU10 = actuator/holder or contact/lamp module (sold separately); 3SU11 = complete pre-assembled unit. Metal or plastic, huge function range (pushbutton, selector, indicator, E-stop).

2. Part-number decode

  • Series: 3SU1 (SIRIUS ACT)
  • Panel cutout: 22mm
  • Construction: modular (operator + holder + contact/lamp modules are separate parts)

3. Compatibility & ordering

Siemens 22mm command switches are modular IEC-style panel devices. Match by size, function (pushbutton/selector/indicator/E-stop), color, illumination, and contact blocks; cross-reference to Schneider Harmony, Allen-Bradley 800F, IDEC HW, or Eaton M22 by the same attributes if needed.

4. Data-quality note

The Siemens series is decoded from the part number (grounded in the Siemens LV1 catalog and distributor listings). The detailed configuration (exact function, color, contact arrangement, voltage) is encoded in the full order code and is left to the Siemens datasheet rather than guessed here. Flagged decoded-partial.

5. Sources

  • Siemens LV1 catalog / SIRIUS ACT (3SU) & Class 52 selection data (siemens.com)
  • Siemens Industry Mall — search the exact part/material number
  • Distributor listing (Mouser / Newark) — search the exact part number

来源
  1. Siemens Industry Mall — 3SU10000AB200AD0 — siemens.com
关于SIRIUS ACT (3SU1)系列

适用于整个系列的所有部件,而不仅仅是3SU10000AB200AD0。

产品系列概述

SIRIUS ACT (3SU1) 是西门子模块化的 22 mm 按钮、选择开关、钥匙开关、急停按钮和指示灯系列。它分为三种设计系列:

  • 3SU1.0: 塑料前环,黑色,22 mm
  • 3SU1.5: 亮面金属,22 mm
  • 3SU1.6: 哑光金属,平面前端,30 mm

自 2017 年 10 月起,它取代了旧的 3SB3、3SB1 和 3SF5 系列,这些旧系列在 2019 年底已无库存。西门子发布了旧代码的转换列表(支持条目 109756490)。16 mm 的 3SB2 是一个独立系列。

产品编号解析

西门子产品编号的格式为 3SU1 ●●● – ● ●●●● – ●●●●。以 3SU1100-0AB20-1BA0 为例,这是一个红色平头按钮,带 1 个 NO 触点:

位置含义值
3SU1 后的第 1 位设备类型0 仅执行器或指示灯,1 完整单元,2 紧凑单元,4 模块,5 支架,8 外壳,9 附件
第 2 位前环0 黑色塑料,5 亮面金属,6 哑光金属
第 3 位照明0 无照明,1 带照明
破折号后执行器类型0 按钮,1 蘑菇头/急停按钮,2 选择开关,3 双位/拨动开关,4–5 钥匙开关,6 指示灯或蜂鸣器,7 坐标开关
字母设计和功能例如 A 平头,B 瞬时
两位数颜色00 琥珀色,10 黑色,20 红色,30 黄色,40 绿色,50 蓝色,60 白色,70 透明
最后一段连接和触点1 螺钉/3 弹簧端子;例如 A 无触点,B 1 NO,C 1 NC;标记(A 无,C "I",D "O");最后一位 2 = ATEX

最常见的错误:单独的执行器(3SU10…、3SU15…、3SU16…,以 -0AA0 结尾)没有支架和触点。要使它工作,您需要添加支架(3SU1500-0AA10-0AA0 塑料,3SU1510-0AA10-0AA0 金属,3SU1550-0AA10-0AA0 通用)和触点模块。完整单元(3SU11…)包含两者。

选择开关

功能字母(短手柄 B,长手柄 C),适用于执行器和完整单元:

  • BF: 2 位,锁定 90°
  • BC: 2 位,从中心向左弹簧返回
  • BL: 3 位,锁定 2 × 45°
  • BM: 3 位,从两侧向中心弹簧返回
  • BP / BN: 从左弹簧返回,锁定右 / 锁定左,从右返回
  • GL: 3 位锁定,可挂锁锁定

例如,3SU1052-2BL10-0AA0 是一个亮面金属 3 位锁定选择执行器;它需要支架和触点。

触点模块(前面板安装)

模块触点
3SU1400-1AA10-1BA01 NO
3SU1400-1AA10-1CA01 NC(正驱动)
3SU1400-1AA10-1DA02 NO
3SU1400-1AA10-1EA02 NC
3SU1400-1AA10-1FA01 NO + 1 NC
3SU1400-1AA10-1HA01 NC 带安装监控(用于急停按钮:如果模块从支架上脱落,触点打开)

在这些代码中,-3… 代替 -1… 表示弹簧端子。额定值:10 A 热电流;AC-15 24–230 V 时 6 A,400 V 时 3 A;DC-13 24 V 时 3 A,110 V 时 0.7 A。机械寿命为 1000 万次操作。触点为慢动作,可靠低至 5 V / 1 mA,适用于 PLC 输入。

系列额定值(西门子目录 IC 10,2026)

  • IP66、IP67、IP69(IP69K)适用于大多数执行器(四联按钮 IP65/IP66)
  • 工作温度 −25 至 +70 °C(储存温度 −40 至 +80 °C)。施耐德的 Harmony 系列额定温度为 −40 °C。
  • 机械寿命:瞬时按钮 1000 万次操作,锁定按钮 50 万次,选择开关 100 万次,急停按钮 30 万次
  • 冲击 15 g;振动 5 g(10–500 Hz);标准 IEC 60947-1 和 IEC 60947-5-1(急停按钮为 IEC 60947-5-5)

安装

孔径 22.3 mm(+0.4 mm;西门子称为 22.5 mm),面板厚度 1–6 mm,使用 3 位支架时,相邻孔距至少 30 mm,上下孔距至少 40 mm(使用 4 位支架时为 40 × 40 mm)。支架从后面卡入,并通过顶部的一个螺钉固定,使用 2 号螺丝刀拧紧至 1.0–1.2 N·m;无需特殊工具。支架预设用于约 4.5 mm 的面板,因此在较厚的面板上先调整螺钉。标签支架和保护帽会减少允许的面板厚度。金属支架在金属面板上通过螺钉尖端接地执行器。

购买注意事项

  • 确认您购买的是完整单元(3SU11…/3SU115…),而不是仅执行器,除非您已有支架和触点模块。
  • 颜色来自代码:…0AB20… 是红色,…0AB60… 是白色。商店有时会误解码;请信任破折号前的两位数。
  • 旧的 3SB3 部件已停产。使用西门子的转换列表找到 3SU1 替代品;通常还需要支架和触点模块。
  • 使用中的问题:在我们可查阅的资料中,未发现重复的故障模式。
来源
  1. Catalog IC 10 · 2026, chapter 13: Commanding and signaling devices (SIRIUS ACT) — Siemens
  2. System Manual SIRIUS ACT 3SU1 pushbuttons and signaling devices — Siemens
  3. Conversion list for the phase-out of 3SB3/3SB1/3SF5 to SIRIUS ACT (3SU1) — Siemens Industry Support
  4. SIRIUS 3SB3/3SB1/3SF5 phase-out (began October 2017) — Siemens Industry Mall
  5. SIRIUS ACT - Performance in Action (3SB3 not available after October 2019) — Siemens / RS

规格参数

Device class
command-switch
Enriched by
siemens-decoder-2026-08-12
Lead time
13 Days
Manufacturer series
3SU1 (SIRIUS ACT)
Modular
true
Mouser part number
982-3SU10000AB200AD0
Panel cutout
22mm
Pn status
decoded-partial
Rohs status
RoHS Compliant
Series description
Siemens SIRIUS ACT 3SU1 22mm modular command switch. 3SU10 = actuator/holder or contact/lamp module (sold separately); 3SU11 = complete pre-assembled unit. Metal or plastic, huge function range (pushbutton, selector, indicator, E-stop)

安装快速参考

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

尺寸

故障排除

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

照片与图纸

图片:mouser.com

快速规格

Device class
command-switch
Enriched by
siemens-decoder-2026-08-12
Lead time
13 Days
Manufacturer series
3SU1 (SIRIUS ACT)
Modular
true