3SU10000AB200AD0
현행 제품Siemens 3SU10000AB200AD0
Switch Actuators PUSHBUTTON, MOM, RED, FLUSH
연구 노트
1. What this is
3SU10000AB200AD0 is a Siemens SIRIUS ACT 3SU1 22mm modular command switch. 3SU10 = actuator/holder or contact/lamp module (sold separately); 3SU11 = complete pre-assembled unit. Metal or plastic, huge function range (pushbutton, selector, indicator, E-stop).
2. Part-number decode
- Series: 3SU1 (SIRIUS ACT)
- Panel cutout: 22mm
- Construction: modular (operator + holder + contact/lamp modules are separate parts)
3. Compatibility & ordering
Siemens 22mm command switches are modular IEC-style panel devices. Match by size, function (pushbutton/selector/indicator/E-stop), color, illumination, and contact blocks; cross-reference to Schneider Harmony, Allen-Bradley 800F, IDEC HW, or Eaton M22 by the same attributes if needed.
4. Data-quality note
The Siemens series is decoded from the part number (grounded in the Siemens LV1 catalog and distributor listings). The detailed configuration (exact function, color, contact arrangement, voltage) is encoded in the full order code and is left to the Siemens datasheet rather than guessed here. Flagged decoded-partial.
5. Sources
- Siemens LV1 catalog / SIRIUS ACT (3SU) & Class 52 selection data (siemens.com)
- Siemens Industry Mall — search the exact part/material number
- Distributor listing (Mouser / Newark) — search the exact part number
출처
- Siemens Industry Mall — 3SU10000AB200AD0 — siemens.com
SIRIUS ACT (3SU1) 제품군 소개
제품 라인 전체에 적용되며, 3SU10000AB200AD0에만 국한되지 않습니다.
제품 라인 소개
SIRIUS ACT(3SU1)는 지멘스의 모듈식 22mm 푸시버튼, 셀렉터 스위치, 키 스위치, 비상 정지 버튼 및 표시등 제품군입니다. 세 가지 디자인 라인으로 구성됩니다:
- 3SU1.0: 플라스틱 프론트 링, 블랙, 22mm
- 3SU1.5: 광택 금속, 22mm
- 3SU1.6: 무광 금속, 평면 프론트, 30mm
2017년 10월부터 이전의 3SB3, 3SB1 및 3SF5 제품군을 대체했으며, 이 제품들은 2019년 말까지 재고에서 사라졌습니다. 지멘스는 이전 코드에서의 전환 목록을 제공합니다(지원 항목 109756490). 16mm 3SB2는 별도의 제품군입니다.
품번 구성 방식
지멘스 품번은 3SU1 ●●● – ● ●●●● – ●●●● 형식입니다. 예를 들어, 빨간색 평면 푸시버튼 1 NO인 3SU1100-0AB20-1BA0를 살펴보겠습니다:
| 위치 | 의미 | 값 |
|---|---|---|
| 3SU1 다음 첫 번째 숫자 | 장치 유형 | 0 액추에이터 또는 표시등만, 1 완전한 유닛, 2 컴팩트 유닛, 4 모듈, 5 홀더, 8 인클로저, 9 액세서리 |
| 두 번째 | 프론트 링 | 0 플라스틱 블랙, 5 광택 금속, 6 무광 금속 |
| 세 번째 | 조명 | 0 비조명, 1 조명 |
| 대시 이후 | 액추에이터 유형 | 0 푸시버튼, 1 버섯형 / 비상 정지, 2 셀렉터 스위치, 3 트윈 / 토글, 4–5 키 스위치, 6 표시등 또는 버저, 7 좌표 스위치 |
| 문자 | 디자인 및 기능 | 예: A 평면, B 순간 |
| 두 자리 숫자 | 색상 | 00 앰버, 10 블랙, 20 레드, 30 옐로우, 40 그린, 50 블루, 60 화이트, 70 투명 |
| 마지막 블록 | 연결 및 접점 | 1 나사 / 3 스프링 단자; 예: A 접점 없음, B 1 NO, C 1 NC; 마킹(A 없음, C "I", D "O"); 마지막 숫자 2 = ATEX |
가장 흔한 실수: 액추에이터만 구매할 경우(3SU10…, 3SU15…, 3SU16…, 끝자리 -0AA0) 홀더와 접점이 없습니다. 작동하려면 홀더(3SU1500-0AA10-0AA0 플라스틱, 3SU1510-0AA10-0AA0 금속, 3SU1550-0AA10-0AA0 유니버설)와 접점 모듈을 추가해야 합니다. 완전한 유닛(3SU11…)은 둘 다 포함합니다.
셀렉터 스위치
기능 문자(짧은 핸들 B, 긴 핸들 C), 액추에이터 및 완전한 유닛:
- BF: 2 위치, 래칭 90°
- BC: 2 위치, 중앙에서 왼쪽으로 스프링 복귀
- BL: 3 위치, 래칭 2 × 45°
- BM: 3 위치, 양쪽에서 중앙으로 스프링 복귀
- BP / BN: 왼쪽에서 스프링 복귀, 오른쪽 래칭 / 왼쪽 래칭, 오른쪽에서 복귀
- GL: 3 위치 래칭, 패드락으로 잠금 가능
예를 들어, 3SU1052-2BL10-0AA0은 광택 금속 3 위치 래칭 셀렉터 액추에이터입니다; 홀더와 접점이 필요합니다.
접점 모듈(전면판 장착)
| 모듈 | 접점 |
|---|---|
| 3SU1400-1AA10-1BA0 | 1 NO |
| 3SU1400-1AA10-1CA0 | 1 NC(양극 구동) |
| 3SU1400-1AA10-1DA0 | 2 NO |
| 3SU1400-1AA10-1EA0 | 2 NC |
| 3SU1400-1AA10-1FA0 | 1 NO + 1 NC |
| 3SU1400-1AA10-1HA0 | 1 NC(설치 감시 포함, 비상 정지용: 모듈이 홀더에서 떨어지면 열림) |
이 코드에서 -1… 대신 -3…은 스프링 단자를 의미합니다. 등급: 열적 10 A; AC-15 24–230 V에서 6 A 및 400 V에서 3 A; DC-13 24 V에서 3 A 및 110 V에서 0.7 A. 기계적 수명은 1천만 회입니다. 접점은 슬로우 액션으로, 5 V / 1 mA까지 신뢰할 수 있으며 PLC 입력에 적합합니다.
제품군 등급(지멘스 카탈로그 IC 10, 2026)
- 대부분의 액추에이터에 대해 IP66, IP67, IP69(IP69K)(쿼드 푸시버튼 IP65/IP66)
- 작동 온도 −25 ~ +70 °C(보관 −40 ~ +80 °C). 슈나이더의 Harmony는 −40 °C까지 등급이 있습니다.
- 기계적 수명: 순간 푸시버튼 1천만 회, 래칭 푸시버튼 50만 회, 셀렉터 스위치 100만 회, 비상 정지 30만 회
- 충격 15 g; 진동 5 g(10–500 Hz); 표준 IEC 60947-1 및 IEC 60947-5-1(비상 정지용 IEC 60947-5-5)
설치
구멍 22.3 mm(+0.4 mm; 지멘스는 이 크기를 22.5 mm라고 함), 패널 1–6 mm, 3 위치 홀더 사용 시 옆으로 최소 30 mm, 위아래로 40 mm 간격(4 위치 홀더 사용 시 40 × 40 mm). 홀더는 뒤에서 클립으로 고정되고 상단의 하나의 나사로 조여지며, 크기 2 드라이버로 1.0–1.2 N·m로 조입니다; 특별한 도구가 필요하지 않습니다. 홀더는 약 4.5 mm 패널에 맞게 사전 설정되어 있으므로 더 두꺼운 패널에서는 먼저 나사를 조정하십시오. 라벨 홀더와 보호 캡은 허용 패널 두께를 줄입니다. 금속 패널에 금속 홀더를 사용하면 나사 끝을 통해 액추에이터가 접지됩니다.
구매 시 참고 사항
- 완전한 유닛(3SU11…/3SU115…)을 구매하는지 확인하십시오. 홀더와 접점 모듈이 없는 경우 액추에이터만 구매하지 마십시오.
- 색상은 코드에서 확인: …0AB20…은 빨간색이고 …0AB60…은 흰색입니다. 가게에서 잘못 해독할 수 있으므로 마지막 대시 앞의 두 자리 숫자를 신뢰하십시오.
- 이전 3SB3 부품은 단종되었습니다. 지멘스의 전환 목록을 사용하여 3SU1 대체품을 찾으십시오; 일반적으로 홀더와 접점 모듈도 필요합니다.
- 사용 중 문제: 우리가 읽을 수 있는 자료에서는 반복적인 고장 패턴을 찾지 못했습니다.
출처
- Catalog IC 10 · 2026, chapter 13: Commanding and signaling devices (SIRIUS ACT) — Siemens
- System Manual SIRIUS ACT 3SU1 pushbuttons and signaling devices — Siemens
- Conversion list for the phase-out of 3SB3/3SB1/3SF5 to SIRIUS ACT (3SU1) — Siemens Industry Support
- SIRIUS 3SB3/3SB1/3SF5 phase-out (began October 2017) — Siemens Industry Mall
- SIRIUS ACT - Performance in Action (3SB3 not available after October 2019) — Siemens / RS
사양 목록
|
Device class
|
command-switch
|
|
Enriched by
|
siemens-decoder-2026-08-12
|
|
Lead time
|
13 Days
|
|
Manufacturer series
|
3SU1 (SIRIUS ACT)
|
|
Modular
|
true
|
|
Mouser part number
|
982-3SU10000AB200AD0
|
|
Panel cutout
|
22mm
|
|
Pn status
|
decoded-partial
|
|
Rohs status
|
RoHS Compliant
|
|
Series description
|
Siemens SIRIUS ACT 3SU1 22mm modular command switch. 3SU10 = actuator/holder or contact/lamp module (sold separately); 3SU11 = complete pre-assembled unit. Metal or plastic, huge function range (pushbutton, selector, indicator, E-stop)
|
설치 빠른 참조
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
외형 치수
문제 해결
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
주요 사양
- Device class
- command-switch
- Enriched by
- siemens-decoder-2026-08-12
- Lead time
- 13 Days
- Manufacturer series
- 3SU1 (SIRIUS ACT)
- Modular
- true