Omron · A7PB 系列

A7PB-206-1

在产
UL CE

A7PB DIN Rail Mount Push Button

Omron A7PB 系列 Introduced circa 2010

Omron A7PB DIN rail mounted push button — mounts directly on DIN rail.

常见应用

Push button that clips directly onto standard 35mm DIN rail inside a panel enclosure. No panel cutout needed. Used for test/reset functions accessible only when the panel door is open. Perfect for commissioning, testing, and maintenance access.

规格参数

Certifications
UL, CE
Contact Configuration
SPDT
Mounting Type
DIN rail (35mm)

安装快速参考

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

尺寸

接线图

故障排除

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

购买渠道

价格范围

$114.95 — $133.61

来自 2 家经销商

快速规格

Certifications
UL, CE
Contact Configuration
SPDT
Mounting Type
DIN rail (35mm)

用户评价

+

“Push button that clips directly onto standard 35mm DIN rail inside a panel enclosure. No panel cutout needed. Used for test/reset functions accessible only when the panel door is open. Perfect for com”

Reddit r/PLC 7 点赞 查看讨论 →