A7PB-206-1
ActifOmron A7PB-206-1 Pushbutton-Type Thumbwheel (BCD Digital Setting) Switch
Omron A7PB DIN rail mounted push button — mounts directly on DIN rail.
Applications courantes
Push button that clips directly onto standard 35mm DIN rail inside a panel enclosure. No panel cutout needed. Used for test/reset functions accessible only when the panel door is open. Perfect for commissioning, testing, and maintenance access.
Spécifications
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CE
|
|
Contact Configuration
Normally Open — circuit is off until you press. Standard for start/go/enable functions.
|
BCD code output (coded digital) — NOT SPDT
|
|
Device type
|
Pushbutton-type thumbwheel (digital setting) switch — up/down buttons, BCD output
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Panel-mount / snap-in (gang-mountable) — NOT DIN rail
|
|
Pn note
|
A7PB = Omron pushbutton-type thumbwheel (digital BCD setting) switch, panel/snap-in mount. Was mislabeled DIN-rail SPDT push button. Verify BCD vs decimal (-206 vs -207) and digit count.
|
|
Pn status
|
mislabel-corrected
|
Référence rapide d'installation
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Dimensions
Schéma de câblage
Dépannage
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Où acheter
Fourchette de prix
$114.95 — $133.61
chez 2 distributeurs
Spécifications rapides
- Certifications
- UL, CE
- Contact Configuration
- BCD code output (coded digital) — NOT SPDT
- Device type
- Pushbutton-type thumbwheel (digital setting) switch — up/down buttons, BCD output
- Mounting Type
- Panel-mount / snap-in (gang-mountable) — NOT DIN rail
- Pn note
- A7PB = Omron pushbutton-type thumbwheel (digital BCD setting) switch, panel/snap-in mount. Was mislabeled DIN-rail SPDT push button. Verify BCD vs decimal (-206 vs -207) and digit count.
Ce qu'en disent les utilisateurs
“Push button that clips directly onto standard 35mm DIN rail inside a panel enclosure. No panel cutout needed. Used for test/reset functions accessible only when the panel door is open. Perfect for com”
En savoir plus
Indices de protection IP expliqués
Ce que signifient IP65, IP66, IP67, IP69K pour votre application
Guide 22mm vs 30mm
Quelle taille de découpe de panneau vous faut-il ?
Blocs de contact : NO vs NC
Comment choisir et câbler les blocs de contact
Outil de recherche de boutons
Trouvez le bon bouton par type, taille et couleur