T-51-SC36
在产Treadlite II Dual Pedal Foot Switch
Linemaster Treadlite II dual pedal — left and right foot.
常见应用
Dual pedal for machines requiring two-foot operation or separate forward/reverse foot control. Left pedal forward, right pedal reverse on lathes and milling machines. Also used for sewing machines with speed control (one pedal) and thread cutter (other pedal).
规格参数
|
Actuator Function
Momentary = springs back when released. Maintained/latching = stays pressed until pressed again.
|
Momentary
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA
|
|
Contact Configuration
The electrical switching arrangement.
|
2x SPDT (independent pedals)
|
|
IP Rating
Ingress Protection rating — first digit is dust (0-6), second is water (0-9). Higher is better.
|
IP54
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
Steel housing
|
安装快速参考
Panel cutout: 22mm. Standard panel mounting — insert from front, secure from behind.
尺寸
接线图
故障排除
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
快速规格
- Actuator Function
- Momentary
- Certifications
- UL, CSA
- Contact Configuration
- 2x SPDT (independent pedals)
- IP Rating
- IP54
- Material
- Steel housing
用户评价
“Dual pedal for machines requiring two-foot operation or separate forward/reverse foot control. Left pedal forward, right pedal reverse on lathes and milling machines. Also used for sewing machines wit”