T-51-SC36
AktywnyTreadlite II Dual Pedal Foot Switch
Linemaster Treadlite II dual pedal — left and right foot.
Typowe Zastosowania
Dual pedal for machines requiring two-foot operation or separate forward/reverse foot control. Left pedal forward, right pedal reverse on lathes and milling machines. Also used for sewing machines with speed control (one pedal) and thread cutter (other pedal).
Specyfikacje
|
Actuator Function
Momentary = springs back when released. Maintained/latching = stays pressed until pressed again.
|
Momentary
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA
|
|
Contact Configuration
The electrical switching arrangement.
|
2x SPDT (independent pedals)
|
|
IP Rating
Ingress Protection rating — first digit is dust (0-6), second is water (0-9). Higher is better.
|
IP54
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
Steel housing
|
Skrócona Instrukcja Montażu
Panel cutout: 22mm. Standard panel mounting — insert from front, secure from behind.
Wymiary
Schemat Połączeń
Rozwiązywanie Problemów
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
Gdzie Kupić
Przedział cenowy
$25.46 — $49.83
u 2 dystrybutorów
Skrócone Specyfikacje
- Actuator Function
- Momentary
- Certifications
- UL, CSA
- Contact Configuration
- 2x SPDT (independent pedals)
- IP Rating
- IP54
- Material
- Steel housing
Co Mówią Użytkownicy
“Dual pedal for machines requiring two-foot operation or separate forward/reverse foot control. Left pedal forward, right pedal reverse on lathes and milling machines. Also used for sewing machines wit”