T-51-SC36
Hoạt độngTreadlite II Dual Pedal Foot Switch
Linemaster Treadlite II dual pedal — left and right foot.
Ứng Dụng Phổ Biến
Dual pedal for machines requiring two-foot operation or separate forward/reverse foot control. Left pedal forward, right pedal reverse on lathes and milling machines. Also used for sewing machines with speed control (one pedal) and thread cutter (other pedal).
Thông số kỹ thuật
|
Actuator Function
Momentary = springs back when released. Maintained/latching = stays pressed until pressed again.
|
Momentary
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA
|
|
Contact Configuration
The electrical switching arrangement.
|
2x SPDT (independent pedals)
|
|
IP Rating
Ingress Protection rating — first digit is dust (0-6), second is water (0-9). Higher is better.
|
IP54
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
Steel housing
|
Hướng Dẫn Cài Đặt Nhanh
Panel cutout: 22mm. Standard panel mounting — insert from front, secure from behind.
Kích thước
Sơ đồ đấu dây
Khắc phục sự cố
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
Nơi Mua Hàng
Dải giá
$25.46 — $49.83
từ 2 nhà phân phối
Thông số kỹ thuật nhanh
- Actuator Function
- Momentary
- Certifications
- UL, CSA
- Contact Configuration
- 2x SPDT (independent pedals)
- IP Rating
- IP54
- Material
- Steel housing
Những Đánh Giá Từ Khách Hàng
“Dual pedal for machines requiring two-foot operation or separate forward/reverse foot control. Left pedal forward, right pedal reverse on lathes and milling machines. Also used for sewing machines wit”