Allen-Bradley · 800T 系列

800T-T2MB

在产
UL CSA

800T 2-Button Pendant Station

Allen-Bradley 800T 系列 Introduced circa 1990

Allen-Bradley 800T 2-button pendant — up/down hoist control.

常见应用

Simple 2-button pendant for single-axis hoist control. Up/Down in a NEMA 4 sealed housing. The American equivalent of the European crane pendant — found on US-built overhead hoists and monorails. Uses standard 800T heavy-duty buttons inside.

规格参数

Actuator Function
Momentary
Certifications
UL, CSA
Contact Configuration
2x 1NO
IP Rating
NEMA 4
Material
Die-cast aluminum

安装快速参考

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

尺寸

接线图

L T 11 12 NO (open) press ↓

故障排除

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

购买渠道

价格范围

$5.39 — $78.69

来自 2 家经销商

快速规格

Actuator Function
Momentary
Certifications
UL, CSA
Contact Configuration
2x 1NO
IP Rating
NEMA 4
Material
Die-cast aluminum

用户评价

“Simple 2-button pendant for single-axis hoist control. Up/Down in a NEMA 4 sealed housing. The American equivalent of the European crane pendant — found on US-built overhead hoists and monorails. Uses”

Reddit r/PLC 17 点赞 查看讨论 →