Allen-Bradley · 800T シリーズ

800T-T2MB

現行品
UL CSA

800T 2-Button Pendant Station

Allen-Bradley 800T シリーズ Introduced circa 1990

Allen-Bradley 800T 2-button pendant — up/down hoist control.

主な用途

Simple 2-button pendant for single-axis hoist control. Up/Down in a NEMA 4 sealed housing. The American equivalent of the European crane pendant — found on US-built overhead hoists and monorails. Uses standard 800T heavy-duty buttons inside.

仕様一覧

Actuator Function
Momentary
Certifications
UL, CSA
Contact Configuration
2x 1NO
IP Rating
NEMA 4
Material
Die-cast aluminum

取付クイックリファレンス

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

外形寸法

配線図

L T 11 12 NO (open) press ↓

トラブルシューティング

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

購入先

価格帯

$5.39 — $78.69

2 社の販売代理店

主要仕様

Actuator Function
Momentary
Certifications
UL, CSA
Contact Configuration
2x 1NO
IP Rating
NEMA 4
Material
Die-cast aluminum

ユーザーの声

“Simple 2-button pendant for single-axis hoist control. Up/Down in a NEMA 4 sealed housing. The American equivalent of the European crane pendant — found on US-built overhead hoists and monorails. Uses”

Reddit r/PLC 17 高評価 スレッドを見る →