Omron · A22 Dòng sản phẩm

A22-FY-10M

Hoạt động
UL CSA CE

A22 Yellow Flush Push Button (1NO)

Mã sản phẩm: A22 - FY - 10M
Omron A22 Dòng sản phẩm Introduced circa 2000
Omron A22-FY-10M — A22 Yellow Flush Push Button (1NO)

Yellow flush momentary push button, Omron A22 series. 22mm cutout, IP65, with 1NO contact. Screw terminals.

Ứng Dụng Phổ Biến

Yellow push button from the Omron A22 series used for intervention functions — fault reset, alarm acknowledgement, and jam-clear operations per IEC 60204-1 color standards. Found on Omron-controlled packaging machines, electronics assembly lines, and food processing equipment built by Japanese and Asian machine builders. The 1NO contact is typically wired to an Omron CJ/NJ PLC input for fault-reset logic. Note the narrower operating temperature range (-10 to 55 degrees C) compared to European brands — suitable for indoor factory environments but not cold storage. Pairs with the A22-FG-10M (green) and A22-FR-01M (red).

Thông số kỹ thuật

Actuator Shape
Round
Actuator Type
Flush
Certifications
UL, CSA, CE
Color
Yellow
Contact Configuration
1NO
Cutout Diameter
22mm
IP Rating
IP65
Material
Plastic
Mounting Type
Panel
Max Operating Temp
55°C
Min Operating Temp
-10°C
Terminal Type
Screw

Thông số kỹ thuật có biểu tượng này được liên kết đến trang nguồn gốc của nhà sản xuất

Các Lựa Chọn Tương Thích

Các sản phẩm này là các tham chiếu chéo tương đương về chức năng từ các nhà sản xuất khác.

Hướng Dẫn Cài Đặt Nhanh

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Kích thước

Front 22mm cutout panel hole diameter Side panel contact ~45mm depth

Sơ đồ đấu dây

L T 11 12 NO (open) press ↓

Khắc phục sự cố

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Thông số kỹ thuật nhanh

Actuator Shape
Round
Actuator Type
Flush
Certifications
UL, CSA, CE
Color
Yellow
Contact Configuration
1NO

Những Đánh Giá Từ Khách Hàng

+

“Solid button for panel builds. Omron A22 series is well-proven in the field. Standard 22mm mounting means easy replacement if needed.”

Reddit r/PLC 16 lượt bình chọn Xem ren

Nguồn Dữ Liệu

Thông số kỹ thuật và dữ liệu sản phẩm được trích dẫn từ các tài liệu tham khảo sau.

A22-FY-10M via Omron

https://www.ia.omron.com/products/family/3482/

Truy cập ngày April 04, 2026

Nguồn