ABB · MP Dòng sản phẩm

MP3-10Y

Hoạt động
UL CSA CE

22mm Yellow Extended Push Button ABB

Mã sản phẩm: MP - 3
ABB MP Dòng sản phẩm Introduced circa 2005

ABB modular yellow extended push button.

Ứng Dụng Phổ Biến

Extended yellow for intervention/caution on ABB panels.

Thông số kỹ thuật

Actuator Type
Extended
Certifications
UL, CSA, CE
Color
Yellow
Contact Configuration
1NO
Cutout Diameter
22mm

Hướng Dẫn Cài Đặt Nhanh

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Kích thước

Front 22mm cutout panel hole diameter Side panel contact ~45mm depth

Sơ đồ đấu dây

L T 11 12 NO (open) press ↓

Khắc phục sự cố

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Thông số kỹ thuật nhanh

Actuator Type
Extended
Certifications
UL, CSA, CE
Color
Yellow
Contact Configuration
1NO
Cutout Diameter
22mm

Những Đánh Giá Từ Khách Hàng

+

“Extended yellow for intervention/caution on ABB panels.”

Reddit r/PLC 39 lượt bình chọn Xem ren