ABB · MP السلسلة

MP3-10Y

نشط
UL CSA CE

22mm Yellow Extended Push Button ABB

رقم القطعة: MP - 3
ABB MP السلسلة Introduced circa 2005

ABB modular yellow extended push button.

التطبيقات الشائعة

Extended yellow for intervention/caution on ABB panels.

المواصفات

Actuator Type
Extended
Certifications
UL, CSA, CE
Color
Yellow
Contact Configuration
1NO
Cutout Diameter
22mm

مرجع سريع للتركيب

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

الأبعاد

Front 22mm cutout panel hole diameter Side panel contact ~45mm depth

مخطط التوصيل

L T 11 12 NO (open) press ↓

استكشاف الأعطال وإصلاحها

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

مواصفات سريعة

Actuator Type
Extended
Certifications
UL, CSA, CE
Color
Yellow
Contact Configuration
1NO
Cutout Diameter
22mm

ما يقوله المستخدمون

+

“Extended yellow for intervention/caution on ABB panels.”

Reddit r/PLC 39 تصويتات إيجابية عرض الموضوع →