WXKG17LM
AktifAqara H1 Smart Wall Switch (No Neutral)
Aqara H1 smart wall switch — Zigbee, no neutral wire required.
Yaygın Uygulamalar
European-style smart wall switch from Aqara. No neutral wire required — critical for European homes where neutral is often not available at the switch. Zigbee 3.0 with native HomeKit support via Aqara Hub. Full Z2M support for Home Assistant. Decoupled mode turns the physical switch into a scene trigger without cutting power to the light.
Açıklık ve Değiştirilebilirlik
Full Zigbee2MQTT support. Decoupled mode is the killer feature — the switch sends a Zigbee event without actually switching the load. Perfect for smart bulbs.
Teknik Özellikler
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
CE
|
|
Smart Home Integrations
Compatible smart home platforms and voice assistants.
|
Aqara Home, Apple HomeKit, Home Assistant, Zigbee2MQTT
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
European round wall box (no neutral required)
|
|
Protocol
The wireless communication standard. BLE = short range, phone direct. Zigbee = mesh network, needs hub. Z-Wave = mesh, needs hub. WiFi = direct, higher power.
|
Zigbee 3.0
|
Hızlı Montaj Kılavuzu
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Boyutlar
Sorun Giderme
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Nereden Satın Alınır
Fiyat aralığı
$116.35 — $118.4
2 distribütörde
Kısa Teknik Özellikler
- Certifications
- CE
- Smart Home Integrations
- Aqara Home, Apple HomeKit, Home Assistant, Zigbee2MQTT
- Mounting Type
- European round wall box (no neutral required)
- Protocol
- Zigbee 3.0
Kullanıcı Görüşleri
“Full Zigbee2MQTT support. Decoupled mode is the killer feature — the switch sends a Zigbee event without actually switching the load. Perfect for smart bulbs.”