WXKG17LM
AktivníAqara Wireless Remote Switch Double Rocker (WXKG17LM)
Aqara H1 smart wall switch — Zigbee, no neutral wire required.
Běžné aplikace
European-style smart wall switch from Aqara. No neutral wire required — critical for European homes where neutral is often not available at the switch. Zigbee 3.0 with native HomeKit support via Aqara Hub. Full Z2M support for Home Assistant. Decoupled mode turns the physical switch into a scene trigger without cutting power to the light.
Výzkumné poznámky
1. Overview
The Aqara WXKG17LM is a battery-powered wireless remote switch — a double-rocker (2-button) Zigbee 3.0 controller (lumi.remote.acn004) that sticks anywhere (no wiring) and sends button presses to control Aqara/Zigbee devices, scenes, and automations. It supports single, double, and long press on each rocker. It runs on a coin cell (CR2032), pairs with an Aqara hub (and works with Apple HomeKit, Home Assistant/ZHA, Zigbee2MQTT). (Data-quality note: this was cataloged as an "H1 Smart Wall Switch (No Neutral)" — i.e. a wired in-wall relay. It is actually a wireless battery remote button, not a wired wall switch. Aqara markets this remote under its H1/E1 lines; the defining fact is it is a stick-on Zigbee button, not a mains-wired switch.)
2. User Sentiment
Loved as a flexible, no-wiring Zigbee controller — mount it as a fake "light switch," bedside remote, or scene button anywhere, with lots of triggers (2 rockers × single/double/long). Works purely locally via ZHA/Zigbee2MQTT. Caveats: it needs a Zigbee hub/coordinator (Aqara devices can be finicky on non-Aqara coordinators — the classic Xiaomi/Aqara Zigbee quirk), and it's a controller, not a load-switching device (it doesn't power a light itself).
3. Real-World Applications
A stick-anywhere Zigbee scene/light controller — mount over a blanked wall box or on furniture to control smart bulbs, run Home Assistant automations, or trigger scenes; two rockers give plenty of mappable actions.
4. Technical Specifications
- Type: Wireless remote switch, double rocker (2-button), battery — not a wired wall switch
- Actions: single / double / long press per rocker
- Protocol: Zigbee 3.0 (
lumi.remote.acn004) - Power: coin cell (CR2032)
- Ecosystem: Aqara hub, Apple HomeKit (via hub), Home Assistant (ZHA), Zigbee2MQTT
- Mount: adhesive / over a European round wall box (no wiring)
5. Ordering & Compatibility
Requires a Zigbee coordinator/hub (Aqara hub, or a HA Zigbee stick with ZHA/Zigbee2MQTT). It's a controller only — pair it with smart bulbs/relays to actually switch loads. Prefer a coordinator known to keep Aqara end-devices online. (Aqara's actual wired smart wall switches use different model codes — don't confuse this remote with those.)
6. Known Issues / DQ
- DQ: it's a battery wireless remote (double rocker), not a wired no-neutral wall switch. Corrected here.
- Practical care: needs a Zigbee hub; Aqara/Xiaomi Zigbee can drop off non-Aqara coordinators/routers; it's a controller (no load switching); CR2032 replacement over time.
Zdroj
- Aqara WXKG17LM Wireless Remote Switch (Double Rocker) — Zigbee2MQTT — zigbee2mqtt.io
- Aqara Wireless Remote Switch (Double Rocker) — aqara.com
Otevřenost a modifikovatelnost
Full Zigbee2MQTT support. Decoupled mode is the killer feature — the switch sends a Zigbee event without actually switching the load. Perfect for smart bulbs.
Specifikace
|
Actions
|
Single / double / long press per rocker
|
|
Available from
|
Aliexpress.com Aliexpress.com
|
|
Battery Type
The battery used. CR2032 = common coin cell, easy to replace. AAA = higher capacity. USB-C = rechargeable.
|
CR2032 coin cell (no wiring/neutral)
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
CE
|
|
Device type
|
Wireless battery remote switch (double rocker, 2-button) — NOT a wired wall switch
|
|
Smart Home Integrations
Compatible smart home platforms and voice assistants.
|
Aqara Home, Apple HomeKit, Home Assistant, Zigbee2MQTT
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Adhesive / over wall box (no wiring)
|
|
Pn note
|
WXKG17LM = Aqara Wireless Remote Switch (double rocker), lumi.remote.acn004 — a battery Zigbee button, NOT a wired no-neutral wall switch. Marketed under H1/E1 lines. Requires Zigbee hub; controller only (no load switching).
|
|
Pn status
|
mislabel-corrected
|
|
Protocol
The wireless communication standard. BLE = short range, phone direct. Zigbee = mesh network, needs hub. Z-Wave = mesh, needs hub. WiFi = direct, higher power.
|
Zigbee 3.0
|
|
Works with
|
ZHA
|
|
Zigbee id
|
lumi.remote.acn004
|
Stručný průvodce instalací
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Rozměry
Řešení problémů
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Kde koupit
Cenové rozpětí
$116.35 — $118.4
across 2 sellers in US dollars
Stručné specifikace
- Actions
- Single / double / long press per rocker
- Available from
- Aliexpress.com Aliexpress.com
- Battery Type
- CR2032 coin cell (no wiring/neutral)
- Certifications
- CE
- Device type
- Wireless battery remote switch (double rocker, 2-button) — NOT a wired wall switch
Co říkají uživatelé
“Full Zigbee2MQTT support. Decoupled mode is the killer feature — the switch sends a Zigbee event without actually switching the load. Perfect for smart bulbs.”
Zjistit více
Zdroje dat
Specifikace a produktové údaje pocházejí z následujících zdrojů.
Blakadder: Aqara E1 Wireless Remote Switch (Double Rocker) WXKG17LM
https://zigbee.blakadder.com/Aqara_WXKG17LM.html