Aqara · H1 Serie

WXKG17LM

Activ
CE

Aqara Wireless Remote Switch Double Rocker (WXKG17LM)

Aqara H1 Serie Introduced circa 2022
Aqara WXKG17LM — Aqara Wireless Remote Switch Double Rocker (WXKG17LM)

Aqara H1 smart wall switch — Zigbee, no neutral wire required.

Aplicații frecvente

European-style smart wall switch from Aqara. No neutral wire required — critical for European homes where neutral is often not available at the switch. Zigbee 3.0 with native HomeKit support via Aqara Hub. Full Z2M support for Home Assistant. Decoupled mode turns the physical switch into a scene trigger without cutting power to the light.

Note de Cercetare

1. Overview

The Aqara WXKG17LM is a battery-powered wireless remote switch — a double-rocker (2-button) Zigbee 3.0 controller (lumi.remote.acn004) that sticks anywhere (no wiring) and sends button presses to control Aqara/Zigbee devices, scenes, and automations. It supports single, double, and long press on each rocker. It runs on a coin cell (CR2032), pairs with an Aqara hub (and works with Apple HomeKit, Home Assistant/ZHA, Zigbee2MQTT). (Data-quality note: this was cataloged as an "H1 Smart Wall Switch (No Neutral)" — i.e. a wired in-wall relay. It is actually a wireless battery remote button, not a wired wall switch. Aqara markets this remote under its H1/E1 lines; the defining fact is it is a stick-on Zigbee button, not a mains-wired switch.)

2. User Sentiment

Loved as a flexible, no-wiring Zigbee controller — mount it as a fake "light switch," bedside remote, or scene button anywhere, with lots of triggers (2 rockers × single/double/long). Works purely locally via ZHA/Zigbee2MQTT. Caveats: it needs a Zigbee hub/coordinator (Aqara devices can be finicky on non-Aqara coordinators — the classic Xiaomi/Aqara Zigbee quirk), and it's a controller, not a load-switching device (it doesn't power a light itself).

3. Real-World Applications

A stick-anywhere Zigbee scene/light controller — mount over a blanked wall box or on furniture to control smart bulbs, run Home Assistant automations, or trigger scenes; two rockers give plenty of mappable actions.

4. Technical Specifications

  • Type: Wireless remote switch, double rocker (2-button), battery — not a wired wall switch
  • Actions: single / double / long press per rocker
  • Protocol: Zigbee 3.0 (lumi.remote.acn004)
  • Power: coin cell (CR2032)
  • Ecosystem: Aqara hub, Apple HomeKit (via hub), Home Assistant (ZHA), Zigbee2MQTT
  • Mount: adhesive / over a European round wall box (no wiring)

5. Ordering & Compatibility

Requires a Zigbee coordinator/hub (Aqara hub, or a HA Zigbee stick with ZHA/Zigbee2MQTT). It's a controller only — pair it with smart bulbs/relays to actually switch loads. Prefer a coordinator known to keep Aqara end-devices online. (Aqara's actual wired smart wall switches use different model codes — don't confuse this remote with those.)

6. Known Issues / DQ

  • DQ: it's a battery wireless remote (double rocker), not a wired no-neutral wall switch. Corrected here.
  • Practical care: needs a Zigbee hub; Aqara/Xiaomi Zigbee can drop off non-Aqara coordinators/routers; it's a controller (no load switching); CR2032 replacement over time.

Sursă
  1. Aqara WXKG17LM Wireless Remote Switch (Double Rocker) — Zigbee2MQTT — zigbee2mqtt.io
  2. Aqara Wireless Remote Switch (Double Rocker) — aqara.com

Deschidere și modificabilitate

Compatibil Zigbee2MQTT

Full Zigbee2MQTT support. Decoupled mode is the killer feature — the switch sends a Zigbee event without actually switching the load. Perfect for smart bulbs.

Specificații

Actions
Single / double / long press per rocker
Available from
Aliexpress.com Aliexpress.com
Battery Type
CR2032 coin cell (no wiring/neutral)
Certifications
CE
Device type
Wireless battery remote switch (double rocker, 2-button) — NOT a wired wall switch
Smart Home Integrations
Aqara Home, Apple HomeKit, Home Assistant, Zigbee2MQTT
Mounting Type
Adhesive / over wall box (no wiring)
Pn note
WXKG17LM = Aqara Wireless Remote Switch (double rocker), lumi.remote.acn004 — a battery Zigbee button, NOT a wired no-neutral wall switch. Marketed under H1/E1 lines. Requires Zigbee hub; controller only (no load switching).
Pn status
mislabel-corrected
Protocol
Zigbee 3.0
Works with
ZHA
Zigbee id
lumi.remote.acn004

Referință rapidă de instalare

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensiuni

Depanare

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Fotografii și Desene

Imagini: zigbee.blakadder.com

De unde cumpărați

Interval de preț

$116.35 — $118.4

across 2 sellers in US dollars

Specificații rapide

Actions
Single / double / long press per rocker
Available from
Aliexpress.com Aliexpress.com
Battery Type
CR2032 coin cell (no wiring/neutral)
Certifications
CE
Device type
Wireless battery remote switch (double rocker, 2-button) — NOT a wired wall switch

Ce spun utilizatorii

+

“Full Zigbee2MQTT support. Decoupled mode is the killer feature — the switch sends a Zigbee event without actually switching the load. Perfect for smart bulbs.”

Reddit r/homeassistant 54 voturi pozitive Vedeți discuția →

Surse de date

Specificațiile și datele produsului provin din următoarele referințe.

Blakadder: Aqara E1 Wireless Remote Switch (Double Rocker) WXKG17LM

https://zigbee.blakadder.com/Aqara_WXKG17LM.html

Sursă