NKK Switches · SmartSwitch Серия

IS15ABFP4CF

В производстве
UL CE

SmartSwitch OLED Programmable Button

NKK Switches SmartSwitch Серия Introduced circa 2010

NKK SmartSwitch — push button with built-in OLED display.

Типичные применения

A push button with a tiny OLED screen built into the cap. The display changes dynamically to show the current function — the same physical button can be Start, Stop, Mode Select, or anything else depending on the software state. Used in broadcast mixing consoles, audio equipment, test instrumentation, and military command systems. The button literally tells you what it does.

Характеристики

Actuator Function
Momentary
Certifications
UL, CE
Cutout Diameter
15mm
Display
36x24 pixel OLED
Interface
SPI
IP Rating
IP40

Краткое руководство по монтажу

Panel cutout: 15mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Габаритные размеры

Front 15mm cutout panel hole diameter Side panel contact ~45mm depth

Устранение неисправностей

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Где купить

Диапазон цен

$71.54 — $87.19

у 2 дистрибьюторов

Краткие характеристики

Actuator Function
Momentary
Certifications
UL, CE
Cutout Diameter
15mm
Display
36x24 pixel OLED
Interface
SPI

Что говорят пользователи

+

“A push button with a tiny OLED screen built into the cap. The display changes dynamically to show the current function — the same physical button can be Start, Stop, Mode Select, or anything else depe”

Reddit r/MechanicalKeyboards 40 голосов Перейти к обсуждению →