NKK Switches · SmartSwitch Series

IS15ABFP4CF

Active
UL CE

SmartSwitch OLED Programmable Button

NKK Switches SmartSwitch Series Introduced circa 2010

NKK SmartSwitch — push button with built-in OLED display.

Common Applications

A push button with a tiny OLED screen built into the cap. The display changes dynamically to show the current function — the same physical button can be Start, Stop, Mode Select, or anything else depending on the software state. Used in broadcast mixing consoles, audio equipment, test instrumentation, and military command systems. The button literally tells you what it does.

Research Notes

1. Overview

The IS15ABFP4CF is a member of NKK Switches' SmartDisplay™ / SmartSwitch IS15 series — the industry's smallest off-the-shelf programmable LCD pushbuttons. The IS15 family integrates a 36x24-pixel FSTN positive LCD display with a momentary pushbutton switch, enabling fully programmable graphical legends, alphanumeric characters, icons, and animated sequences. NKK's SmartSwitch line is a flagship product offering combining display technology with electromechanical switching for advanced human-machine interfaces.

IMPORTANT — Exact PN Verdict: IS15ABFP4CF does not appear in any distributor database (DigiKey, Mouser, Arrow, Octopart, Newark) as an active or obsolete stocked part. The closest confirmed real parts are IS15ABCP4CF (DigiKey 360-2330-ND, now obsolete, bicolor Red/Green, "C" actuator style) and IS15ABFP4RGB (DigiKey 6281-IS15ABFP4RGB-ND, now obsolete, RGB backlight, "F" actuator style). The part number IS15ABFP4CF is internally consistent within the NKK IS15 naming system — the "ABF" prefix and "P4CF" suffix are each attested in confirmed part numbers — but the specific combination "IS15ABFP4CF" (F-style actuator + CF bicolor suffix on AB-body) has no confirmed stocking record. Verdict: valid-unlisted config — the part number is a plausible NKK IS15 configuration that may have existed (same obsolete generation as IS15ABCP4CF) but cannot be confirmed from available distributor or NKK records.


2. User Sentiment

No specific user reviews or forum discussions were found for IS15ABFP4CF. However, the broader NKK SmartDisplay IS15 series is well-regarded in professional engineering circles for its compact form factor and off-the-shelf programmability. The AB-generation parts (IS15ABCP4CF, IS15ABFP4RGB) are now obsolete and replaced by the BA-series (IS15BAFP4CF, IS15BBFP4RGB), which offer a wider viewing area (17.0mm×13.0mm vs 15.0mm×10.8mm). No significant complaints were found; the transition to B-series represents a design improvement rather than a deficiency in the original parts.


3. Real-World Applications

NKK SmartDisplay IS15 pushbuttons are used in broadcast control panels, medical device interfaces, industrial automation operator terminals, and test & measurement equipment where each button must display context-sensitive labels. The compact form factor makes them suitable for dense control surfaces in audio/video mixers, rack-mount routers, and process control panels. The programmable LCD eliminates the need for static silk-screened legends, allowing one hardware design to serve multiple functions or product variants.


4. Technical Specifications

  • Type: Programmable LCD SmartDisplay pushbutton, SPST-NO (normally open, momentary off-on)
  • Display: 36 × 24 pixel FSTN positive LCD (Black & White, with LED backlight providing color)
  • Viewing Area: 15.0mm × 10.8mm (AB-generation; B-generation is 17.0mm × 13.0mm)
  • Face Size: 23.13mm × 20.59mm
  • Backlight (per PN decode): CF suffix = bicolor Red/Green LED color filter; F actuator style (flush/frameless bezel). If the F position encodes a frameless actuator as seen in IS15ABFP4RGB, the CF suffix would give bicolor Red/Green rather than RGB
  • Contact Rating: 0.1A @ 12VDC
  • Supply Voltage: 3.0 – 5.5VDC (logic/display supply)
  • LED Forward Current: 15mA per color (Red 2.1VDC; Green 3.3VDC — per IS15ABCP4CF data)
  • Operating Force: 224 gf
  • Travel: 1.8mm
  • Mounting: Through-hole, straight PC pin terminals
  • Contact Finish: Gold plating
  • Operating Temperature: 0°C to 40°C
  • Interface Clock: Up to 8MHz (current B-generation; earlier AB-generation was 6MHz)
  • Life Expectancy: 1,000,000 cycles (per IS15ABCP4CF data)
  • Series: NKK SmartSwitch™ / SmartDisplay™ IS15

5. Ordering & Compatibility

IS15ABFP4CF is not currently stocked at any major distributor and has no confirmed DigiKey/Mouser catalog number. The nearest confirmed substitutes are IS15BAFP4CF (bicolor, wide-view, ~$30.26 at DigiKey, active) and IS15BBFP4RGB (RGB, wide-view, ~$36.62 at DigiKey, active). Compatible mounting sockets for the B-series include AT9704-02YC and AT9704-065E (standard) and AT9704-065F (compact). The P4 suffix in IS15 part numbers references the 4-pin connector configuration. The AB-generation (IS15ABCP4CF, IS15ABFP4RGB) has been fully superseded by the BA/BB generation with improved viewing area and 8MHz interface.


6. Known Issues

The exact part number IS15ABFP4CF is unverified and does not appear in any distributor inventory or NKK product listing — it may be a non-produced configuration, a catalog entry error, or a very early/custom variant. Engineers should substitute IS15BAFP4CF (bicolor) or IS15BBFP4RGB (RGB) from the current active lineup. The AB-prefix generation parts are obsolete; using them in new designs is not recommended. Operating temperature is limited to 0–40°C, which may restrict outdoor or wide-temperature-range applications.


12 sources
  1. IS15ABCP4CF NKK Switches | Programmable Display Switches | DigiKey — digikey.com
  2. IS15ABFP4RGB NKK Switches | Switches | DigiKey Marketplace — digikey.com
  3. SmartDisplay™ LCD 36x24 Pushbuttons/Displays — NKK | DigiKey — digikey.com
  4. LCD 36x24 Engineering Kits User Manual | NKK Switches Docs — docs.nkkswitches.com
  5. SmartDisplay | OLED & LCD Programmable Displays — NKK Switches — nkkswitches.com
  6. IS15BAFP4CF — SmartSwitch | NKK Switches (HK) — nkkswitches.com.hk
  7. IS15ABCP4CF — NKK Switches | OMO Electronic — omo-ic.com
  8. NKK Switches IS15ABFP4B — Programmable Display Switches — quarktwin.com
  9. SmartDisplay — NKK Switches | DigiKey — digikey.com
  10. IS15BSAFP4CF — NKK Switches Compact LCD 36x24 Bicolor Pushbutton | Newark — newark.com
  11. NKK Switches IS15ABCP4CF Smart Switch STN Positive LCD Red/Green LED | Allied Electronics — alliedelec.com
  12. NKK SmartSwitch IS Series Catalog PDF — nkk.com

Specifications

Actuator Function
Momentary
Certifications
UL, CE
Cutout Diameter
15mm
Display
36x24 pixel OLED
Interface
SPI
IP Rating
IP40

Installation Quick Reference

Panel cutout: 15mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensions

Front 15mm cutout panel hole diameter Side panel contact ~45mm depth

Troubleshooting

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Where to Buy

Price range

$71.54 — $87.19

across 2 sellers in US dollars

Quick Specs

Actuator Function
Momentary
Certifications
UL, CE
Cutout Diameter
15mm
Display
36x24 pixel OLED
Interface
SPI

What People Are Saying

+

“A push button with a tiny OLED screen built into the cap. The display changes dynamically to show the current function — the same physical button can be Start, Stop, Mode Select, or anything else depe”

Reddit r/MechanicalKeyboards 40 upvotes View thread →