Allen-Bradley · Bulletin 800F Серия

800F-X10

В производстве
UL CSA CE CCC

Bulletin 800F 22mm 1NO Screw Contact Block

Allen-Bradley Bulletin 800F Серия
Allen-Bradley 800F-X10 — Bulletin 800F 22mm 1NO Screw Contact Block

1 Normally Open screw-terminal contact block for the Allen-Bradley 800F 22mm push button system. Latch-mount design snaps onto the rear of any 800FM, 800FP, or 800FD operator.

Типичные применения

Found behind every 22mm IEC start button on Allen-Bradley panels. Maintenance techs swap these when a start button stops registering — the latch mount lets you pop it off without removing the operator from the panel. The 600V/10A rating covers virtually all control circuit applications.

Исследовательские заметки

1. Overview

The Allen-Bradley 800F-X10 is a 22 mm contact block for Rockwell's Bulletin 800F 22 mm pilot-device line — a single normally-open (1 NO) contact with screw terminals, that latch-mounts to the rear of an 800F operator (pushbutton, selector, e-stop). It's the switching element behind the operator: you add the required number of X10 (NO) / X01 (NC) blocks to build the contact configuration. Rated to 600 V, ~10 million operations, UL/CSA/CE/CCC. (This is the genuine 800F-X contact block — the 800F-X series is contacts/operators, which is why "800F enclosed stations" like 800F-1XA10/2XA10 (#434/#444) are fabricated — 800F doesn't make enclosed stations.)

2. User Sentiment

The 800F line is a mainstream North-American 22 mm pilot-device standard — the modular contact blocks are valued for reliable latch-on mounting, finger-safe screw terminals, and broad availability. As a component there's no "sentiment"; the key is ordering the correct NO vs NC blocks and count for the operator's function.

3. Real-World Applications

Providing a 1 NO contact behind an 800F pushbutton/selector/e-stop — e.g. a start contact, or an input to a PLC/contactor. Stack multiple X10/X01 blocks for multi-contact operators.

4. Technical Specifications

  • Type: Bulletin 800F 22 mm contact block — 1 NO
  • Terminals: screw
  • Mounting: latch-mount to rear of 800F operator/holder
  • Ratings: up to 600 V AC/DC; ~10 million operations
  • Material: thermoplastic
  • Approvals: UL, CSA, CE, CCC

5. Ordering & Compatibility

Latch-mounts onto 800F 22 mm operators/holders; combine blocks for the needed contacts (e.g. X10 = 1 NO, X01 = 1 NC). Sold in packs (e.g. qty 10). Confirm you need NO vs NC and the terminal type (screw here; other 800F blocks offer spring/quick-connect). Part of the 800F/800H 22 mm system.

6. Known Issues

No notable reliability issues — a standard AB contact block. Practical care: pick the correct NO/NC and count, verify the terminal type (screw), and ensure it's the right series (800F 22 mm, not 800T 30 mm).


Источник
  1. Allen-Bradley 800F-X10 22mm 1NO screw contact block — rockwellautomation.com
  2. Allen-Bradley 800F-X10 800F 22mm contact block 1NO screw — rs-online.com

Характеристики

Certifications
UL, CSA, CE, CCC
Contact Configuration
1NO
Cutout Diameter
22.5mm
Device type
Bulletin 800F 22mm contact block (1NO, screw) — latch-mounts to rear of 800F operator
Family note
800F-X series = contact blocks (X10=1NO, X01=1NC); the genuine part vs fabricated 800F stations #434/#444
Material
Thermoplastic
Mechanical Life
10,000,000 cycles
Mounting Type
Latch-mount (rear of operator)
Terminal Type
Screw
Max Voltage
600V AC/DC

Краткое руководство по монтажу

Mounting: Snap onto the rear of any compatible button body in the same series. The latch clicks audibly when properly seated. Some models require a mounting adapter.

Wiring: Terminals are marked NO (11/12) or NC (21/22). Use 0.5-2.5mm² wire with ferrules. Tighten to 0.8 Nm. Verify with a multimeter before energizing.

Габаритные размеры

Front 22.5mm cutout panel hole diameter Side panel contact ~45mm depth

Схема подключения

L T 11 12 NO (open) press ↓

Устранение неисправностей

Intermittent switching

Silver contacts are pitted from arcing. Replace the contact block — they are consumable parts. If arcing is severe, check that the switched load doesn't exceed the contact rating (typically 6A at 120VAC).

Contact block won't snap onto button body

Verify the contact block series matches the button head series (e.g., Schneider ZB4 blocks fit ZB4 heads only, not ZB5). Check for debris or damage on the mounting tabs.

Фотографии и чертежи

Изображения: media.rs-online.com

Где купить

Диапазон цен

$7.5 — $8.9

across 2 sellers in US dollars

Краткие характеристики

Certifications
UL, CSA, CE, CCC
Contact Configuration
1NO
Cutout Diameter
22.5mm
Device type
Bulletin 800F 22mm contact block (1NO, screw) — latch-mounts to rear of 800F operator
Family note
800F-X series = contact blocks (X10=1NO, X01=1NC); the genuine part vs fabricated 800F stations #434/#444

Что говорят пользователи

+

“Solid Allen-Bradley product, widely available and well-documented.”

Reddit r/PLC by u/controls_tech_251 21 голосов Перейти к обсуждению →