800F-X10
ActifBulletin 800F 22mm 1NO Screw Contact Block
1 Normally Open screw-terminal contact block for the Allen-Bradley 800F 22mm push button system. Latch-mount design snaps onto the rear of any 800FM, 800FP, or 800FD operator.
Applications courantes
Found behind every 22mm IEC start button on Allen-Bradley panels. Maintenance techs swap these when a start button stops registering — the latch mount lets you pop it off without removing the operator from the panel. The 600V/10A rating covers virtually all control circuit applications.
Notes de Recherche
1. Overview
The Allen-Bradley 800F-X10 is a 22 mm contact block for Rockwell's Bulletin 800F 22 mm pilot-device line — a single normally-open (1 NO) contact with screw terminals, that latch-mounts to the rear of an 800F operator (pushbutton, selector, e-stop). It's the switching element behind the operator: you add the required number of X10 (NO) / X01 (NC) blocks to build the contact configuration. Rated to 600 V, ~10 million operations, UL/CSA/CE/CCC. (This is the genuine 800F-X contact block — the 800F-X series is contacts/operators, which is why "800F enclosed stations" like 800F-1XA10/2XA10 (#434/#444) are fabricated — 800F doesn't make enclosed stations.)
2. User Sentiment
The 800F line is a mainstream North-American 22 mm pilot-device standard — the modular contact blocks are valued for reliable latch-on mounting, finger-safe screw terminals, and broad availability. As a component there's no "sentiment"; the key is ordering the correct NO vs NC blocks and count for the operator's function.
3. Real-World Applications
Providing a 1 NO contact behind an 800F pushbutton/selector/e-stop — e.g. a start contact, or an input to a PLC/contactor. Stack multiple X10/X01 blocks for multi-contact operators.
4. Technical Specifications
- Type: Bulletin 800F 22 mm contact block — 1 NO
- Terminals: screw
- Mounting: latch-mount to rear of 800F operator/holder
- Ratings: up to 600 V AC/DC; ~10 million operations
- Material: thermoplastic
- Approvals: UL, CSA, CE, CCC
5. Ordering & Compatibility
Latch-mounts onto 800F 22 mm operators/holders; combine blocks for the needed contacts (e.g. X10 = 1 NO, X01 = 1 NC). Sold in packs (e.g. qty 10). Confirm you need NO vs NC and the terminal type (screw here; other 800F blocks offer spring/quick-connect). Part of the 800F/800H 22 mm system.
6. Known Issues
No notable reliability issues — a standard AB contact block. Practical care: pick the correct NO/NC and count, verify the terminal type (screw), and ensure it's the right series (800F 22 mm, not 800T 30 mm).
Source
- Allen-Bradley 800F-X10 22mm 1NO screw contact block — rockwellautomation.com
- Allen-Bradley 800F-X10 800F 22mm contact block 1NO screw — rs-online.com
Spécifications
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA, CE, CCC
|
|
Contact Configuration
Normally Open — circuit is off until you press. Standard for start/go/enable functions.
|
1NO
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22.5mm
|
|
Device type
|
Bulletin 800F 22mm contact block (1NO, screw) — latch-mounts to rear of 800F operator
|
|
Family note
|
800F-X series = contact blocks (X10=1NO, X01=1NC); the genuine part vs fabricated 800F stations #434/#444
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
Thermoplastic
|
|
Mechanical Life
How many press cycles before mechanical failure. Higher is better — 10M cycles at 100 presses/day = 274 years.
|
10,000,000 cycles
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Latch-mount (rear of operator)
|
|
Terminal Type
How you connect wires. Screw clamp is most common in industrial. Spring cage is faster but requires proper ferrules.
|
Screw
|
|
Max Voltage
|
600V AC/DC
|
Référence rapide d'installation
Mounting: Snap onto the rear of any compatible button body in the same series. The latch clicks audibly when properly seated. Some models require a mounting adapter.
Wiring: Terminals are marked NO (11/12) or NC (21/22). Use 0.5-2.5mm² wire with ferrules. Tighten to 0.8 Nm. Verify with a multimeter before energizing.
Dimensions
Schéma de câblage
Dépannage
Intermittent switching
Silver contacts are pitted from arcing. Replace the contact block — they are consumable parts. If arcing is severe, check that the switched load doesn't exceed the contact rating (typically 6A at 120VAC).
Contact block won't snap onto button body
Verify the contact block series matches the button head series (e.g., Schneider ZB4 blocks fit ZB4 heads only, not ZB5). Check for debris or damage on the mounting tabs.
Où acheter
Fourchette de prix
$7.5 — $8.9
across 2 sellers in US dollars
Spécifications rapides
- Certifications
- UL, CSA, CE, CCC
- Contact Configuration
- 1NO
- Cutout Diameter
- 22.5mm
- Device type
- Bulletin 800F 22mm contact block (1NO, screw) — latch-mounts to rear of 800F operator
- Family note
- 800F-X series = contact blocks (X10=1NO, X01=1NC); the genuine part vs fabricated 800F stations #434/#444
Ce qu'en disent les utilisateurs
“Solid Allen-Bradley product, widely available and well-documented.”