Schneider Electric · Harmony XB4 Series

ZB4-BC4

Active
UL CSA CE

22mm Red Mushroom Momentary Button XB4

Part number: ZB4 - B
Schneider Electric Harmony XB4 Series Introduced circa 2003

Schneider XB4 red 40mm mushroom momentary (non-latching) button.

Common Applications

40mm red mushroom that springs back — NOT an e-stop (e-stops must latch). Used for cycle stop, hold, and pause functions where the machine should stop while pressed and restart immediately when released. Also used in two-hand safety circuits where both hands must press simultaneously.

Research Notes

1. Overview

The Schneider Electric ZB4BC4 is a 22 mm metal mushroom-head operator for the Harmony XB4 / ZB4 system — a red Ø40 mushroom, momentary (spring-return), non-illuminated pushbutton head. As a ZB4 part it is the head only — it mounts on an XB4 body/fixing collar and needs a separate ZB4-Bxxx contact block to function (the complete factory unit would be XB4-BC4). The "BC" code denotes the momentary mushroom actuator (distinct from BT = latching push-pull mushroom and BS = emergency-stop turn/pull-release); the trailing 4 = red.

2. User Sentiment

Harmony XB4 metal mushrooms are standard, well-built industrial operators. The key practical point is that ZB4 is modular/head-only — you order the head plus the matching contact block (and body/collar), which gives flexibility but means the head alone is not a working button. A momentary red mushroom (BC) is used where a large, easy-to-hit non-latching button is wanted — not as a latching emergency stop (that's the ZB4-BS e-stop head).

3. Real-World Applications

A large red momentary mushroom for a prominent stop/function press that returns when released (e.g. a jog/hold or momentary stop) — where the big mushroom target is desired but latching is not. For a true E-STOP, use the latching ZB4-BS/XB4-BS instead.

4. Technical Specifications

  • Type: Harmony XB4/ZB4 metal mushroom head (head-only)
  • Actuator: Ø40 mushroom, momentary (spring-return), non-illuminated; red
  • Cutout: 22 mm; metal (chrome) bezel
  • Contacts: none integral — add a ZB4 contact block (complete unit = XB4-BC4)
  • Sealing: IP66 (assembled)
  • Approvals: UL, CSA, CE

5. Ordering & Compatibility

Order the ZB4BC4 head plus a Harmony ZB4 contact block (e.g. ZB4-BZ10x/contact) and mounting — or buy the complete XB4-BC4 unit. Fits 22 mm cutouts, XB4/XB5 system. Code family: BC = momentary mushroom, BT = latching push-pull mushroom, BS = e-stop; color digit 4 = red.

6. Known Issues

No notable reliability issues — standard Harmony hardware. Practical care: it's a head only (order the contact block/body), it's a momentary mushroom (not a latching E-STOP — don't substitute for safety-stop duty), and confirm the 22 mm cutout and contact configuration.


2 sources
  1. ZB4BC4 — Head for non-illuminated pushbutton, red Ø40 mushroom — se.com
  2. Schneider ZB4BC4 red mushroom head, momentary, Harmony XB4 — mouser.com
About the Harmony XB4 range

Applies to every part of the range, not only the ZB4-BC4.

What the range is

Harmony XB4 is Schneider Electric's range of metal 22 mm pushbuttons, selector switches, key switches, emergency stops and pilot lights, with a chromium-plated (or black) metal bezel. Older parts and many shops still use the Telemecanique name. The same functions exist as 30 mm flush-mounted versions (XB4F / ZB4F), and Harmony XB5 is the plastic, double-insulated twin of the range.

How the part numbers fit together

  • Complete unit = body + head. XB4BA31 is the body with its contact (ZB4BZ101) plus the head (ZB4BA3). You can also buy the three loose parts: fixing collar ZB4BZ009, contact block ZBE101 and the head.
  • One letter changes the mounting: ZB4B… is the standard 22 mm head, ZB4F… the 30 mm flush version (ZB4BA3 → ZB4FA3).
  • Black metal bezel: add 7 to the head (ZB4BD2 → ZB4BD27).
  • Push-in terminals: complete units ending in 5 use compact push-in contact blocks (XB4BD335 instead of XB4BD33).
  • Selector heads: ZB4BD2 two positions stay put; ZB4BD4 two positions, spring return from right to left; ZB4BD3 three positions stay put; ZB4BD5 spring return to centre; ZB4BD7 / ZB4BD8 spring return from left / right to centre. J instead of D is the long handle (ZB4BJ3), G a key switch, K an illuminated selector.
  • Pilot lights: the letter after BV is the voltage (B = 24 V, G = 110–120 V, M = 230–240 V); the last digit is the colour.

Bodies and contact blocks

Body with contactsContactsContact blockType
ZB4BZ1011 NOZBE101NO
ZB4BZ1021 NCZBE102NC
ZB4BZ1032 NOZBE203 / ZBE204 / ZBE205double: 2 NO / 2 NC / NO + NC
ZB4BZ1042 NCZBE1016 / ZBE1026low-power (electronic inputs)
ZB4BZ1051 NO + 1 NCZBE201 / ZBE202early-make NO / late-break NC
ZB4BZ1411 NO + 2 NCZBE501–ZBE505high-power switching

Contact blocks clip on in up to three rows. Illuminated units take a Universal LED light block (ZBVB1 24 V, ZBVG1 110–120 V, ZBVM1 230–240 V, marked "UN"); one block works with every lens colour.

Ratings for the whole range (Schneider catalogue, January 2026)

  • IP66, IP67, IP69, IP69K and UL Type 4X; impact IK06 (the plastic XB5: IK03)
  • −40 to +70 °C; up to 10 million operations for pushbuttons
  • 22 mm hole, with or without the anti-rotation notch; panel 1–6 mm
  • IEC, UL, CSA, CCC, EAC, JIS; marine approvals (BV, Lloyd's Register, DNV)

Individual datasheets can differ from these range figures. The XB4BD33 selector, for example, is rated for 1 million cycles.

Installing

The head holds itself in the panel hole, so one person can fit it. The body clips on from behind and is clamped with its screw (0.8 N·m, max 1.2 N·m); there is no nut, unlike the plastic XB5, whose nut is tightened with tool ZB5AZ905. Terminals take 0.34–1.5 mm² (AWG 22–16), two wires per terminal, at 0.8–1.2 N·m. Schneider says the anti-loosening terminal screws need no periodic retightening. To remove a body, put a flat screwdriver into the black tab and pull it back.

Useful accessories

  • Legend holder ZBZ32 (30 × 40 mm) with printed legends such as ZBY2385 "AUTO-O-HAND", ZBY2186 "I-O-II", ZBY2178 "O-I", ZBY2303 "START", ZBY2304 "STOP"; ZBY2101 is blank for engraving
  • Guards: ZBZ2102 plastic guard for selectors and key switches; ZBZ1605 metal guard for emergency stops (padlockable)
  • Blanking plug ZB4SZ3 (with collar ZB4BZ009) for an unused hole; liquid-spray washer ZB4BZ007 under the head
  • 30 mm flush kits ZB4BZ021 (pushbuttons, pilot lights) and ZB4BZ022 (selectors, illuminated pushbuttons)

Metal XB4 or plastic XB5?

They do the same jobs and fit the same 22 mm hole. Choose metal for impact, vibration and heat (e.g. weld spatter), plastic for double insulation and a lower price; both come in high IP versions. Schneider China notes that there XB4 is import-only while XB5 is also made locally. Schneider's cheaper ranges are Easy Harmony XA2 (metal) and XB2 / XB7.

Buying notes

  • Look-alikes: many marketplace listings use XB4 codes for unbranded copies, at factory prices around $1 a piece. A seller's video comparing a "high-quality counterfeit" with a genuine contact block shows the copy's NO contact cutting out on a continuity test. Buy from an authorised distributor and check the Schneider marking.
  • IP66 vs IP67/IP69K: catalogue section headers quote IP66 for whole groups of products, while the datasheets of individual parts list IP67, IP69 and IP69K. Shops copy either figure.
  • Discontinued and missing codes: some complete units are no longer made, e.g. XB4BD73 (January 2022). The heads are usually still sold, so the switch can be built from head + body.
  • Problems in use: we found no recurring failure pattern for the range in the forums and reviews we could read; the complaints we found were about counterfeits and wrong listings.
8 sources
  1. Harmony XB4 metal Control and signaling units catalog (DIA5ED2121212EN, January 2026) — Schneider Electric
  2. Instruction sheet XB4/XB5 - mounting and tightening torques (BRU46063) — Schneider Electric
  3. XB4BD73 - discontinued on 27 January 2022 — Schneider Electric
  4. FAQ FA421338: difference between XB4 and XB5 (2022) — Schneider Electric China
  5. Pulsadores Schneider Harmony XB4 y XB5 (IK06 vs IK03, ratings) — Schneider Electric Latinoamérica, YouTube, 2019
  6. Botonería Harmony XB4 y XB5 - how to choose — Dominio Electric, YouTube, 2024
  7. Mounting Tutorial: Harmony XB4/ZB4 22 mm Pushbutton & Contacts — RS Americas, YouTube, 2020
  8. How to Spot Counterfeit Schneider XB4 Push Buttons (seller's demo) — Alara, YouTube, 2026

Specifications

Actuator code
BC = momentary mushroom (vs BT latching push-pull, BS e-stop); 4 = red
Actuator Function
Momentary (spring return)
Actuator Type
Mushroom 40mm
Certifications
UL, CSA, CE
Color
Red
Contact Configuration
None integral (head-only; add ZB4 contact block)
Cutout Diameter
22mm
Device type
ZB4 HEAD only (non-illuminated red Ø40 mushroom, momentary); complete unit = XB4-BC4
IP Rating
IP66
Material
Metal

Installation Quick Reference

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensions

Front 22mm cutout panel hole diameter Side panel contact ~45mm depth

Wiring Diagram

L T 11 12 NO (open) press ↓

Troubleshooting

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Quick Specs

Actuator code
BC = momentary mushroom (vs BT latching push-pull, BS e-stop); 4 = red
Actuator Function
Momentary (spring return)
Actuator Type
Mushroom 40mm
Certifications
UL, CSA, CE
Color
Red

What People Are Saying

+

“40mm red mushroom that springs back — NOT an e-stop (e-stops must latch). Used for cycle stop, hold, and pause functions where the machine should stop while pressed and restart immediately when releas”

Reddit r/PLC 17 upvotes View thread →