A7PB-206-1
ActiveOmron A7PB-206-1 Pushbutton-Type Thumbwheel (BCD Digital Setting) Switch
Omron A7PB DIN rail mounted push button — mounts directly on DIN rail.
Common Applications
Push button that clips directly onto standard 35mm DIN rail inside a panel enclosure. No panel cutout needed. Used for test/reset functions accessible only when the panel door is open. Perfect for commissioning, testing, and maintenance access.
Research Notes
1. Overview
The Omron A7PB-206-1 is a pushbutton-type thumbwheel switch — a panel-mount digital setting switch where up/down pushbuttons (instead of a rotating wheel) increment/decrement the displayed digit, outputting a BCD (binary-coded-decimal) code to a controller. It's part of Omron's A7P pushbutton-thumbwheel family (A7PS/A7PB/A7PH), used to set numeric values (timers, counters, addresses) on equipment front panels. It is snap-in/panel-mount, not DIN-rail, and its output is a coded digital switch — not a single SPDT contact. (Data-quality note: this was cataloged as a "DIN Rail Mount Push Button, SPDT" — it is a panel-mount pushbutton thumbwheel switch with BCD code output, not a DIN-rail SPDT pushbutton.)
2. User Sentiment
Thumbwheel/pushwheel switches are classic industrial front-panel input for setting a number without a keypad/HMI — valued for being simple, robust, and readable at a glance. The pushbutton (A7PB) type is chosen over rotary wheels where up/down setting is preferred. As legacy digital-setting hardware, the practical points are the output code (BCD vs decimal), the number of digits/poles, and gang-mounting multiple units side by side.
3. Real-World Applications
Front-panel numeric setting on machines and controllers — e.g. entering a timer/counter preset, a recipe number, or a device address — read by a PLC/logic as a BCD code. Multiple units gang together for multi-digit values.
4. Technical Specifications
- Type: Omron A7P pushbutton-type thumbwheel (digital setting) switch
- Setting: up/down pushbuttons set the digit
- Output: BCD code (coded digital output — not a single SPDT contact)
- Mounting: panel-mount / snap-in (gang-mountable) — not DIN rail
- Ratings: low-level switching (≈0.1 A class @ 125 VAC/28 VDC, per A7P family)
- Approvals: UL, CE
5. Ordering & Compatibility
Panel cutout for snap-in mounting; gang multiple units for multi-digit setting. The A7P family differs by output code and style (e.g. A7PS rotary vs A7PB pushbutton; "-206" vs "-207" denote output/pole variants — confirm BCD vs decimal and digit count for your logic). Related Omron thumbwheel families: A7B/A7BS/A7BL.
6. Known Issues / DQ
- DQ: it's a panel-mount pushbutton thumbwheel (BCD) switch, not a DIN-rail SPDT pushbutton. Corrected here (mounting + output + device type).
- Practical care: match the output code (BCD/decimal) and digit/pole count to the controller input; it's a legacy digital-setting device (verify availability), and it mounts in a panel cutout, gang-mounted for multiple digits.
2 sources
Specifications
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CE
|
|
Contact Configuration
Normally Open — circuit is off until you press. Standard for start/go/enable functions.
|
BCD code output (coded digital) — NOT SPDT
|
|
Device type
|
Pushbutton-type thumbwheel (digital setting) switch — up/down buttons, BCD output
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Panel-mount / snap-in (gang-mountable) — NOT DIN rail
|
|
Pn note
|
A7PB = Omron pushbutton-type thumbwheel (digital BCD setting) switch, panel/snap-in mount. Was mislabeled DIN-rail SPDT push button. Verify BCD vs decimal (-206 vs -207) and digit count.
|
|
Pn status
|
mislabel-corrected
|
Installation Quick Reference
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Dimensions
Wiring Diagram
Troubleshooting
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Where to Buy
Price range
$114.95 — $133.61
across 2 sellers in US dollars
Quick Specs
- Certifications
- UL, CE
- Contact Configuration
- BCD code output (coded digital) — NOT SPDT
- Device type
- Pushbutton-type thumbwheel (digital setting) switch — up/down buttons, BCD output
- Mounting Type
- Panel-mount / snap-in (gang-mountable) — NOT DIN rail
- Pn note
- A7PB = Omron pushbutton-type thumbwheel (digital BCD setting) switch, panel/snap-in mount. Was mislabeled DIN-rail SPDT push button. Verify BCD vs decimal (-206 vs -207) and digit count.
What People Are Saying
“Push button that clips directly onto standard 35mm DIN rail inside a panel enclosure. No panel cutout needed. Used for test/reset functions accessible only when the panel door is open. Perfect for com”