Allen-Bradley · 800F Seria

800F-FP4

Aktywny
UL CSA CE

800F Red Guarded Push Button

Allen-Bradley 800F Seria Introduced circa 2005

AB 800F red guarded (shrouded) push button.

Typowe Zastosowania

Guarded stop button for AB panels. Raised ring prevents accidental presses. For panels near moving machinery.

Specyfikacje

Actuator Type
Guarded/Shrouded
Certifications
UL, CSA, CE
Color
Red
Cutout Diameter
22mm
IP Rating
IP66

Skrócona Instrukcja Montażu

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Wymiary

Front 22mm cutout panel hole diameter Side panel contact ~45mm depth

Rozwiązywanie Problemów

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Gdzie Kupić

Przedział cenowy

$11.52 — $206.0

u 2 dystrybutorów

Skrócone Specyfikacje

Actuator Type
Guarded/Shrouded
Certifications
UL, CSA, CE
Color
Red
Cutout Diameter
22mm
IP Rating
IP66

Co Mówią Użytkownicy

+

“Guarded stop button for AB panels. Raised ring prevents accidental presses. For panels near moving machinery.”

Reddit r/PLC 31 głosy za Zobacz wątek →