800F-FP4
Active800F Red Guarded Push Button
AB 800F red guarded (shrouded) push button.
Common Applications
Guarded stop button for AB panels. Raised ring prevents accidental presses. For panels near moving machinery.
Research Notes
1. What this is
800F-FP4 does not correspond to a real Allen-Bradley product. It was recorded in this catalog as "800F Red Guarded Push Button", but the code violates Rockwell's actual Bulletin 800F naming and returns no manufacturer or distributor results. If you found this exact code somewhere, it is almost certainly auto-generated or mistyped — treat it as non-existent.
2. Why it isn't real
Rockwell's genuine Bulletin 800F 22 mm pilot-device system uses:
- Colors as DIGITS, never letters: 1 = white, 3 = green, 4 = red, 5 = yellow, 6 = blue, 7 = black. Codes like "A7", "A1", "A4M1", "A8A8", "LW4" have no valid color field (there is no "A#" color, and 800F has no orange).
- Operators with actuator letters — e.g. 800FP-F3 (green flush), 800FP-F4 (red flush), 800FP-E3 (green extended). See the genuine operator entries in this catalog (#524 800FP-F3, #525 800FP-F4).
- Separate contact blocks — 800F-X10 (1 NO), 800F-X01 (1 NC) — that latch onto the operator (#523). 800F does not ship "complete/enclosed stations"; enclosed pushbutton stations are a different Rockwell line (800T / 800H, 30.5 mm). "Guarded/Shrouded" is a recurring catalog mislabel (cf ZB4BP2 #450 = projecting, M22-DRP-R #451 = mushroom) — not a real 800F actuator.
3. What you probably want instead
"Guarded" is not an 800F actuator style. For a red 800F pushbutton, use 800FP-F4 (flush red) or a red mushroom (800FP-MP4); a physical guard/shroud is a separate accessory.
4. Why this page exists (data-quality)
Kept deliberately. The Button Index ranks for this exact code, so rather than show a misleading spec sheet, this page tells you the code isn't a real product and points you to the genuine 800F system. Flagged pn_status: fabricated. If you have a source proving otherwise, it can be reinstated.
2 sources
- Allen-Bradley Bulletin 800F 22mm push buttons (genuine naming) — rockwellautomation.com
- 800F 22mm Push Button Specifications / catalog-number decoder — rockwellautomation.com
Specifications
|
Actuator Type
The button head style. Flush sits level with the bezel (prevents accidental presses). Extended protrudes for easy access.
|
Guarded/Shrouded
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
UL, CSA, CE
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Red
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22mm
|
|
IP Rating
IP66: Dust-tight and withstands powerful water jets from any direction. Standard for outdoor and washdown applications.
|
IP66
|
|
Pn note
|
[2026-08-11] Confirmed fabricated. Also: "guarded/shrouded" is a known mislabel template (cf ZB4BP2 #450 = projecting, M22-DRP-R #451 = mushroom) — not a real 800F actuator style.
|
|
Pn notes
|
Fabricated 800F PN — letter-coded actuator/color violates Rockwell's real scheme (actuator codes F/G/E/R; colors are DIGITS: 1 white/3 green/4 red/5 yellow/6 blue/7 black). 0 distributor hits. Re-key to genuine 800FP-/800FM- by intended color/type, or remove.
|
|
Pn status
|
fabricated
|
Installation Quick Reference
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Dimensions
Troubleshooting
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Where to Buy
Price range
$11.52 — $206.0
across 2 distributors
Quick Specs
- Actuator Type
- Guarded/Shrouded
- Certifications
- UL, CSA, CE
- Color
- Red
- Cutout Diameter
- 22mm
- IP Rating
- IP66
What People Are Saying
“Guarded stop button for AB panels. Raised ring prevents accidental presses. For panels near moving machinery.”