Allen-Bradley · 800F シリーズ

800F-FP4

現行品
UL CSA CE

800F Red Guarded Push Button

Allen-Bradley 800F シリーズ Introduced circa 2005

AB 800F red guarded (shrouded) push button.

主な用途

Guarded stop button for AB panels. Raised ring prevents accidental presses. For panels near moving machinery.

仕様一覧

Actuator Type
Guarded/Shrouded
Certifications
UL, CSA, CE
Color
Red
Cutout Diameter
22mm
IP Rating
IP66

取付クイックリファレンス

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

外形寸法

Front 22mm cutout panel hole diameter Side panel contact ~45mm depth

トラブルシューティング

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

購入先

価格帯

$11.52 — $206.0

2 社の販売代理店

主要仕様

Actuator Type
Guarded/Shrouded
Certifications
UL, CSA, CE
Color
Red
Cutout Diameter
22mm
IP Rating
IP66

ユーザーの声

+

“Guarded stop button for AB panels. Raised ring prevents accidental presses. For panels near moving machinery.”

Reddit r/PLC 31 高評価 スレッドを見る →