Allen-Bradley · 800F 시리즈

800F-1XA10-A1G

현행 제품
UL CSA

800F 1-Button Green Start Station Enclosed

Allen-Bradley 800F 시리즈 Introduced circa 2005

Allen-Bradley 800F enclosed start station.

일반적인 용도

Complete AB start station in NEMA 4 enclosure. Pre-assembled 800F green button with 1NO contact. For remote start points on US industrial equipment.

사양 목록

Certifications
UL, CSA
Color
Green
Contact Configuration
1NO
IP Rating
NEMA 4
Mounting Type
Surface mount (enclosed)

설치 빠른 참조

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

외형 치수

배선도

L T 11 12 NO (open) press ↓

문제 해결

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

구매처

가격 범위

$5.33 — $84.97

2개 대리점

주요 사양

Certifications
UL, CSA
Color
Green
Contact Configuration
1NO
IP Rating
NEMA 4
Mounting Type
Surface mount (enclosed)

사용자 후기

+

“Complete AB start station in NEMA 4 enclosure. Pre-assembled 800F green button with 1NO contact. For remote start points on US industrial equipment.”

Reddit r/PLC 49 추천 스레드 보기 →