L21AE03
AttivoBACO L21AE03 22mm Black 70mm Mushroom Momentary Pushbutton (chrome bezel)
BACO L21 illuminated green.
Applicazioni Comuni
Budget German illuminated start button.
Specifiche
|
Actuator Function
Momentary = springs back when released. Maintained/latching = stays pressed until pressed again.
|
Momentary
|
|
Actuator Type
The button head style. Flush sits level with the bezel (prevents accidental presses). Extended protrudes for easy access.
|
Mushroom Ø70mm
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
CE
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Black
|
|
Contact Configuration
The electrical switching arrangement.
|
Per contact block (e.g. -3E01 suffix); verify
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22mm
|
|
Device type
|
22mm-mount black 70mm mushroom momentary pushbutton (non-illuminated)
|
|
Material
The bezel/body material. Metal bezels are more durable in harsh environments. Plastic is lighter and cheaper.
|
Chrome (metal) bezel
|
|
Pn note
|
Corrected: L21AE03 = 22mm BLACK 70mm MUSHROOM momentary, non-illuminated (distributor). Was mislabeled green illuminated 24V 1NO flush. BACO 03=black (cf #398), AE=mushroom. Black momentary mushroom = function control, not e-stop.
|
|
Pn status
|
mislabel-corrected
|
Guida Rapida all'Installazione
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Dimensioni
Schema di Cablaggio
Risoluzione dei Problemi
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Dove Acquistare
Fascia di prezzo
$1.38 — $34.12
presso 2 distributori
Specifiche Rapide
- Actuator Function
- Momentary
- Actuator Type
- Mushroom Ø70mm
- Certifications
- CE
- Color
- Black
- Contact Configuration
- Per contact block (e.g. -3E01 suffix); verify
Cosa Dicono gli Utenti
“Budget German illuminated start button.”
Approfondisci
Classificazioni IP Spiegate
Cosa significano IP65, IP66, IP67, IP69K per la Sua applicazione
Guida 22mm vs 30mm
Quale dimensione del foro pannello Le serve?
Blocchi Contatti: NO vs NC
Come scegliere e cablare i blocchi contatti
Strumento Trova Pulsante
Trovi il pulsante giusto per tipo, dimensione e colore