BACO Controls · L21 Seeria

L21AE03

Aktiivne
CE

BACO 22mm Green Illuminated 24V 1NO

BACO Controls L21 Seeria Introduced circa 2000

BACO L21 illuminated green.

Tüüpilised rakendused

Budget German illuminated start button.

Spetsifikatsioonid

Certifications
CE
Color
Green
Contact Configuration
1NO
Cutout Diameter
22mm
Illumination
Illuminated
LED Voltage
24V

Paigalduse kiirjuhend

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Mõõtmed

Front 22mm cutout panel hole diameter Side panel contact ~45mm depth

Ühenduseskeem

L T 11 12 NO (open) press ↓

Veaotsing

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Kust osta

Hinnavahemik

$1.38 — $34.12

2 edasimüüja juures

Kiirspetsifikatsioonid

Certifications
CE
Color
Green
Contact Configuration
1NO
Cutout Diameter
22mm
Illumination
Illuminated

Mida kasutajad ütlevad

+

“Budget German illuminated start button.”

Reddit r/PLC 31 poolthääli Vaata arutelu →