BACO Controls · L21 Řada

L21AE03

Aktivní
CE

BACO 22mm Green Illuminated 24V 1NO

BACO Controls L21 Řada Introduced circa 2000

BACO L21 illuminated green.

Běžné aplikace

Budget German illuminated start button.

Specifikace

Certifications
CE
Color
Green
Contact Configuration
1NO
Cutout Diameter
22mm
Illumination
Illuminated
LED Voltage
24V

Stručný průvodce instalací

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Rozměry

Front 22mm cutout panel hole diameter Side panel contact ~45mm depth

Schéma zapojení

L T 11 12 NO (open) press ↓

Řešení problémů

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Kde koupit

Cenové rozpětí

$1.38 — $34.12

u 2 distributorů

Stručné specifikace

Certifications
CE
Color
Green
Contact Configuration
1NO
Cutout Diameter
22mm
Illumination
Illuminated

Co říkají uživatelé

+

“Budget German illuminated start button.”

Reddit r/PLC 31 hlasů Zobrazit vlákno →