AR22-S2-01
सक्रियAR22 22mm 2-Position Selector 1NO
Fuji AR22 2-position selector.
सामान्य अनुप्रयोग
Manual/Auto selector for Fuji panels.
स्पेसिफिकेशन
|
Actuator Function
Momentary = springs back when released. Maintained/latching = stays pressed until pressed again.
|
Maintained
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
JIS, UL, CE
|
|
Contact Configuration
Normally Open — circuit is off until you press. Standard for start/go/enable functions.
|
1NO
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22mm
|
इंस्टॉलेशन त्वरित संदर्भ
Panel cutout: 22mm. Align the selector positions with the desired panel markings before tightening.
Contact blocks: Attach one contact block per position. Wire each to a separate PLC input for position feedback. A 2-position switch needs 1-2 blocks; 3-position needs 2-3.
आयाम
वायरिंग डायग्राम
समस्या निवारण
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
कहाँ से खरीदें
मूल्य सीमा
$5.34 — $52.92
2 वितरकों से
संक्षिप्त स्पेसिफिकेशन
- Actuator Function
- Maintained
- Certifications
- JIS, UL, CE
- Contact Configuration
- 1NO
- Cutout Diameter
- 22mm
उपयोगकर्ता क्या कह रहे हैं
“Manual/Auto selector for Fuji panels.”