AR22-S2-01
ActifAR22 22mm 2-Position Selector 1NO
Fuji AR22 2-position selector.
Applications courantes
Manual/Auto selector for Fuji panels.
Spécifications
|
Actuator Function
Momentary = springs back when released. Maintained/latching = stays pressed until pressed again.
|
Maintained
|
|
Certifications
Third-party safety certifications. UL = required for US NEC installations. CE = EU compliance. CSA = Canadian standards.
|
JIS, UL, CE
|
|
Contact Configuration
1NO + 1NC: One circuit closes and one opens when pressed. Common for start buttons that also signal 'running' state.
|
1 contact — verify NO vs NC (stored 1NO; Fuji -01 sometimes 1NC)
|
|
Cutout Diameter
The hole size you drill in your panel to mount this button. 22mm is the most common industrial standard worldwide.
|
22mm
|
|
Device type
|
Fuji AR22 2-position maintained selector switch (knob)
|
|
Series
The manufacturer's product family. Products in the same series share mounting systems and accessories.
|
Fuji Electric AR22 command devices
|
Référence rapide d'installation
Panel cutout: 22mm. Align the selector positions with the desired panel markings before tightening.
Contact blocks: Attach one contact block per position. Wire each to a separate PLC input for position feedback. A 2-position switch needs 1-2 blocks; 3-position needs 2-3.
Dimensions
Schéma de câblage
Dépannage
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
Où acheter
Fourchette de prix
$5.34 — $52.92
chez 2 distributeurs
Spécifications rapides
- Actuator Function
- Maintained
- Certifications
- JIS, UL, CE
- Contact Configuration
- 1 contact — verify NO vs NC (stored 1NO; Fuji -01 sometimes 1NC)
- Cutout Diameter
- 22mm
- Device type
- Fuji AR22 2-position maintained selector switch (knob)
Ce qu'en disent les utilisateurs
“Manual/Auto selector for Fuji panels.”