3RSB015BZ
在产Third Reality Smart Button Zigbee
Third Reality Smart Button — large press area, Zigbee 3.0.
常见应用
The most kid/elderly-friendly smart button. Large 2-inch diameter press surface — cant miss it. Zigbee 3.0 with full Z2M support. Single, double, and long press. The large size makes it the go-to for accessibility applications — bedside for elderly, panic button, or kid-friendly light control. Adhesive or screw mount.
开放性与可改装性
Full Zigbee2MQTT and ZHA support. Large community adoption. No hub required with generic Zigbee coordinator. All press events fully exposed in Home Assistant.
规格参数
|
Battery Life
Expected battery life under normal use. BLE buttons typically last 1-2 years on a coin cell.
|
2 years
|
|
Battery Type
The battery used. CR2032 = common coin cell, easy to replace. AAA = higher capacity. USB-C = rechargeable.
|
CR2032
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
White
|
|
Smart Home Integrations
Compatible smart home platforms and voice assistants.
|
SmartThings, Home Assistant, Zigbee2MQTT
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Adhesive or screw
|
|
Protocol
The wireless communication standard. BLE = short range, phone direct. Zigbee = mesh network, needs hub. Z-Wave = mesh, needs hub. WiFi = direct, higher power.
|
Zigbee 3.0
|
安装快速参考
Setup: Pair with your hub or phone via Zigbee 3.0. Most smart buttons support single press, double press, and long press for three different actions.
Battery: Uses CR2032 battery. Expected life: 2 years. Low battery notification via the app.
尺寸
故障排除
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
快速规格
- Battery Life
- 2 years
- Battery Type
- CR2032
- Color
- White
- Smart Home Integrations
- SmartThings, Home Assistant, Zigbee2MQTT
- Mounting Type
- Adhesive or screw
用户评价
“Full Zigbee2MQTT and ZHA support. Large community adoption. No hub required with generic Zigbee coordinator. All press events fully exposed in Home Assistant.”
