3RSB015BZ
نشطThird Reality Smart Button Zigbee
Third Reality Smart Button — large press area, Zigbee 3.0.
التطبيقات الشائعة
The most kid/elderly-friendly smart button. Large 2-inch diameter press surface — cant miss it. Zigbee 3.0 with full Z2M support. Single, double, and long press. The large size makes it the go-to for accessibility applications — bedside for elderly, panic button, or kid-friendly light control. Adhesive or screw mount.
الانفتاح وقابلية التعديل
Full Zigbee2MQTT and ZHA support. Large community adoption. No hub required with generic Zigbee coordinator. All press events fully exposed in Home Assistant.
المواصفات
|
Battery Life
Expected battery life under normal use. BLE buttons typically last 1-2 years on a coin cell.
|
2 years
|
|
Battery Type
The battery used. CR2032 = common coin cell, easy to replace. AAA = higher capacity. USB-C = rechargeable.
|
CR2032
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
White
|
|
Smart Home Integrations
Compatible smart home platforms and voice assistants.
|
SmartThings, Home Assistant, Zigbee2MQTT
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Adhesive or screw
|
|
Protocol
The wireless communication standard. BLE = short range, phone direct. Zigbee = mesh network, needs hub. Z-Wave = mesh, needs hub. WiFi = direct, higher power.
|
Zigbee 3.0
|
مرجع سريع للتركيب
Setup: Pair with your hub or phone via Zigbee 3.0. Most smart buttons support single press, double press, and long press for three different actions.
Battery: Uses CR2032 battery. Expected life: 2 years. Low battery notification via the app.
الأبعاد
استكشاف الأعطال وإصلاحها
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
أين تشتري
نطاق السعر
$51.11 — $128.5
عبر 2 موزع
مواصفات سريعة
- Battery Life
- 2 years
- Battery Type
- CR2032
- Color
- White
- Smart Home Integrations
- SmartThings, Home Assistant, Zigbee2MQTT
- Mounting Type
- Adhesive or screw
ما يقوله المستخدمون
“Full Zigbee2MQTT and ZHA support. Large community adoption. No hub required with generic Zigbee coordinator. All press events fully exposed in Home Assistant.”
