OBSF-24-R
在产OBSF-24 Red 24mm Snap-in
Sanwa OBSF-24 red 24mm.
常见应用
Red 24mm for Start button on fight sticks and arcade cabinets. The smaller 24mm size distinguishes auxiliary buttons from 30mm action buttons.
规格参数
|
Actuation Force
The force needed to press the button. Lower = more sensitive. Sanwa ~65g (light), Seimitsu ~85g (medium), Happ ~130g (heavy).
|
65g
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Red
|
|
Diameter
|
24mm
|
|
Microswitch Type
The internal switch mechanism. Built-in = sealed unit. Cherry D44X = replaceable, clicky. Omron = quieter, longer life.
|
Built-in
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Snap-in
|
|
Travel Distance
How far the button moves when pressed. Shorter = faster response. Sanwa 0.85mm is extremely short for competitive gaming.
|
0.85mm
|
安装快速参考
Mounting: Snap-in buttons push into a 24mm hole from the top of the panel. Screw-in buttons thread from below and secure with a nut. Use 2-3mm acrylic, wood, or metal panel.
Wiring: Connect the microswitch terminals to your encoder or PCB. Common ground shared across all buttons. Quick-disconnect (0.110") terminals are standard on Japanese buttons.
尺寸
故障排除
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
快速规格
- Actuation Force
- 65g
- Color
- Red
- Diameter
- 24mm
- Microswitch Type
- Built-in
- Mounting Type
- Snap-in
用户评价
“Red 24mm for Start button on fight sticks and arcade cabinets. The smaller 24mm size distinguishes auxiliary buttons from 30mm action buttons.”
