MSS710HK
在产Meross Smart Wi-Fi DIY Switch (MSS710HK)
Meross WiFi smart button with native HomeKit support.
常见应用
One of the few WiFi smart buttons with native Apple HomeKit support — no bridge needed. Press to trigger HomeKit scenes. Also works with Alexa and Google Home. Meross cloud optional — HomeKit works locally via your Apple TV or HomePod as hub. For Apple households who want a physical button.
开放性与可改装性
HomeKit works locally through Apple Home hub (Apple TV/HomePod). Meross cloud optional for non-Apple platforms. Cannot flash custom firmware. The local HomeKit path makes it more private than most WiFi buttons.
规格参数
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
White
|
|
Device type
|
Wi-Fi DIY switch/relay module (NOT a pushbutton)
|
|
Smart Home Integrations
Compatible smart home platforms and voice assistants.
|
Apple HomeKit, Alexa, Google Home, Meross App
|
|
Pn note
|
MSS710HK is the Meross Smart Wi-Fi DIY Switch — a mains-wired inline relay module, not a battery pushbutton. Stored battery specs (USB-C rechargeable, 3-month life) were fabricated. Candidate for recategorization or removal from a button index.
|
|
Pn status
|
mislabeled-not-a-button
|
|
Power
|
Mains-powered inline relay module (wire L/N/Load); no battery
|
|
Protocol
The wireless communication standard. BLE = short range, phone direct. Zigbee = mesh network, needs hub. Z-Wave = mesh, needs hub. WiFi = direct, higher power.
|
WiFi 2.4GHz
|
安装快速参考
Setup: Pair with your hub or phone via WiFi 2.4GHz. Most smart buttons support single press, double press, and long press for three different actions.
Battery: Uses CR2032 battery. Expected life: 1-2 years. Low battery notification via the app.
尺寸
故障排除
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
快速规格
- Color
- White
- Device type
- Wi-Fi DIY switch/relay module (NOT a pushbutton)
- Smart Home Integrations
- Apple HomeKit, Alexa, Google Home, Meross App
- Pn note
- MSS710HK is the Meross Smart Wi-Fi DIY Switch — a mains-wired inline relay module, not a battery pushbutton. Stored battery specs (USB-C rechargeable, 3-month life) were fabricated. Candidate for recategorization or removal from a button index.
- Pn status
- mislabeled-not-a-button
用户评价
“HomeKit works locally through Apple Home hub (Apple TV/HomePod). Meross cloud optional for non-Apple platforms. Cannot flash custom firmware. The local HomeKit path makes it more private than most WiF”