MSS710HK
ActiveMeross Smart Wi-Fi DIY Switch (MSS710HK)
Meross WiFi smart button with native HomeKit support.
Common Applications
One of the few WiFi smart buttons with native Apple HomeKit support — no bridge needed. Press to trigger HomeKit scenes. Also works with Alexa and Google Home. Meross cloud optional — HomeKit works locally via your Apple TV or HomePod as hub. For Apple households who want a physical button.
Research Notes
1. Overview
The Meross MSS710HK is a Smart Wi-Fi "DIY" switch module — a small inline relay you wire into mains (Live / Neutral / Load) to make a lamp, fan, space heater, or fixture smart. It is not a battery-powered pushbutton; it has no battery and no physical user button for scenes — it switches the connected load on/off over 2.4 GHz Wi-Fi and via the Meross app, HomeKit, Alexa, and Google. (Data-quality note: this catalog entry was mislabeled as a "Meross Smart WiFi Button" with a rechargeable USB-C battery — both are incorrect. MSS710HK is a mains-wired relay module.)
2. User Sentiment
Popular as a cheap way to add smart control to an existing device without replacing the wall switch — wire it inside a lamp base or junction box and control the load remotely / by voice / on a schedule. HomeKit support at a low price is the main draw. Caveats are the usual for DIY relays: it requires in-line mains wiring (some risk / needs Neutral), a snug space to tuck the module, and Meross's cloud/app for full features. It is not a scene controller or handheld remote.
3. Real-World Applications
Making a "dumb" lamp, fan, string lights, or small appliance app/voice-controllable and schedulable; embedding smarts inside a fixture where a plug-in smart plug won't fit. On/off (and timing) control of a single wired load.
4. Technical Specifications
- Type: Smart Wi-Fi inline DIY switch/relay module (on/off of a wired load) — not a button
- Power: mains-powered, no battery (wire L / N / Load)
- Load: single resistive/light load (~10 A class; check Meross rating for your appliance)
- Protocol: Wi-Fi 2.4 GHz
- Ecosystem: Apple HomeKit, Alexa, Google Home, Meross app (SmartThings on some regions)
- Color: White (concealed module)
5. Ordering & Compatibility
Sold by Meross and retailers as the "Smart Wi-Fi DIY Switch." Installation requires basic mains wiring (Live, Neutral, Load) — for in-fixture or junction-box use, not a plug-in and not a remote. Works with HomeKit/Alexa/Google via the Meross app.
6. Hackability & Known Issues
- Hackability: moderate. Meross devices have a community local-control path (e.g. the
meross_lanHome Assistant integration talks to them locally over MQTT/HTTP), so it can run without the cloud once set up; not vendor-flashable in general. - Known issues / DQ: wrong product class for a "button" index — it's a wired relay, not a pushbutton; requires mains wiring (Neutral needed); relies on Meross app/cloud for setup. This entry's stored battery specs (USB-C rechargeable, 3-month life) are fabricated and have been flagged.
2 sources
- Meross Smart Wi-Fi DIY Switch, MSS710HK — meross.com
- Smart WiFi DIY Switch (MSS710) — beyttech.com
Openness & Hackability
HomeKit works locally through Apple Home hub (Apple TV/HomePod). Meross cloud optional for non-Apple platforms. Cannot flash custom firmware. The local HomeKit path makes it more private than most WiFi buttons.
Specifications
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
White
|
|
Device type
|
Wi-Fi DIY switch/relay module (NOT a pushbutton)
|
|
Smart Home Integrations
Compatible smart home platforms and voice assistants.
|
Apple HomeKit, Alexa, Google Home, Meross App
|
|
Pn note
|
MSS710HK is the Meross Smart Wi-Fi DIY Switch — a mains-wired inline relay module, not a battery pushbutton. Stored battery specs (USB-C rechargeable, 3-month life) were fabricated. Candidate for recategorization or removal from a button index.
|
|
Pn status
|
mislabeled-not-a-button
|
|
Power
|
Mains-powered inline relay module (wire L/N/Load); no battery
|
|
Protocol
The wireless communication standard. BLE = short range, phone direct. Zigbee = mesh network, needs hub. Z-Wave = mesh, needs hub. WiFi = direct, higher power.
|
WiFi 2.4GHz
|
Installation Quick Reference
Setup: Pair with your hub or phone via WiFi 2.4GHz. Most smart buttons support single press, double press, and long press for three different actions.
Battery: Uses CR2032 battery. Expected life: 1-2 years. Low battery notification via the app.
Dimensions
Troubleshooting
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
Where to Buy
Price range
$123.24 — $151.7
across 2 sellers in US dollars
Quick Specs
- Color
- White
- Device type
- Wi-Fi DIY switch/relay module (NOT a pushbutton)
- Smart Home Integrations
- Apple HomeKit, Alexa, Google Home, Meross App
- Pn note
- MSS710HK is the Meross Smart Wi-Fi DIY Switch — a mains-wired inline relay module, not a battery pushbutton. Stored battery specs (USB-C rechargeable, 3-month life) were fabricated. Candidate for recategorization or removal from a button index.
- Pn status
- mislabeled-not-a-button
What People Are Saying
“HomeKit works locally through Apple Home hub (Apple TV/HomePod). Meross cloud optional for non-Apple platforms. Cannot flash custom firmware. The local HomeKit path makes it more private than most WiF”