Gateron · KS-3 Pro 系列

KS-3-MILKY-Y

在产

Gateron Milky Yellow Pro Linear

Gateron KS-3 Pro 系列 Introduced circa 2021

Gateron Milky Yellow Pro — pre-lubed budget king.

常见应用

The r/MechanicalKeyboards community favorite. Factory pre-lubed for smooth feel without DIY lubing. Milky housing diffuses RGB light better than clear housing. 50g spring weight. Under $0.25 per switch. The single most recommended budget switch in the custom keyboard community.

规格参数

Actuation Force
50g
Color
Yellow stem, milky housing
Mechanical Life
80,000,000 cycles
Travel Distance
2mm actuation, 4mm total

安装快速参考

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

尺寸

故障排除

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

购买渠道

价格范围

$44.23 — $47.04

来自 2 家经销商

快速规格

Actuation Force
50g
Color
Yellow stem, milky housing
Mechanical Life
80,000,000 cycles
Travel Distance
2mm actuation, 4mm total

用户评价

“The r/MechanicalKeyboards community favorite. Factory pre-lubed for smooth feel without DIY lubing. Milky housing diffuses RGB light better than clear housing. 50g spring weight. Under $0.25 per switc”

Reddit r/MechanicalKeyboards 29 点赞 查看讨论 →