KS-3-MILKY-Y
Hoạt độngGateron Milky Yellow Pro Linear
Gateron Milky Yellow Pro — pre-lubed budget king.
Ứng Dụng Phổ Biến
The r/MechanicalKeyboards community favorite. Factory pre-lubed for smooth feel without DIY lubing. Milky housing diffuses RGB light better than clear housing. 50g spring weight. Under $0.25 per switch. The single most recommended budget switch in the custom keyboard community.
Thông số kỹ thuật
|
Actuation Force
The force needed to press the button. Lower = more sensitive. Sanwa ~65g (light), Seimitsu ~85g (medium), Happ ~130g (heavy).
|
50g
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Yellow stem, milky housing
|
|
Mechanical Life
How many press cycles before mechanical failure. Higher is better — 10M cycles at 100 presses/day = 274 years.
|
80,000,000 cycles
|
|
Travel Distance
How far the button moves when pressed. Shorter = faster response. Sanwa 0.85mm is extremely short for competitive gaming.
|
2mm actuation, 4mm total
|
Hướng Dẫn Cài Đặt Nhanh
Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).
Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.
Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.
Kích thước
Khắc phục sự cố
Button doesn't respond when pressed
Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.
Works intermittently
Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.
Button feels mushy or doesn't click
The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.
Nơi Mua Hàng
Dải giá
$44.23 — $47.04
từ 2 nhà phân phối
Thông số kỹ thuật nhanh
- Actuation Force
- 50g
- Color
- Yellow stem, milky housing
- Mechanical Life
- 80,000,000 cycles
- Travel Distance
- 2mm actuation, 4mm total
Những Đánh Giá Từ Khách Hàng
“The r/MechanicalKeyboards community favorite. Factory pre-lubed for smooth feel without DIY lubing. Milky housing diffuses RGB light better than clear housing. 50g spring weight. Under $0.25 per switc”
