GF-HBFS-30
在产GamerFinger HBFS-30 MX-Compatible Button
GamerFinger HBFS-30 — the original MX-compatible arcade button.
常见应用
GamerFinger invented the MX-compatible arcade button before Qanba Gravity existed. Hot-swap any Cherry MX, Gateron, or Kailh switch into a 30mm arcade button. The original that proved mechanical keyboard switches work great in arcade applications. Limited production runs make these collector items.
规格参数
|
Actuation Force
The force needed to press the button. Lower = more sensitive. Sanwa ~65g (light), Seimitsu ~85g (medium), Happ ~130g (heavy).
|
Depends on switch
|
|
Diameter
|
30mm
|
|
Mechanical Life
How many press cycles before mechanical failure. Higher is better — 10M cycles at 100 presses/day = 274 years.
|
Depends on switch
|
|
Microswitch Type
The internal switch mechanism. Built-in = sealed unit. Cherry D44X = replaceable, clicky. Omron = quieter, longer life.
|
Hot-swap MX-compatible
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Snap-in
|
安装快速参考
Mounting: Snap-in buttons push into a 30mm hole from the top of the panel. Screw-in buttons thread from below and secure with a nut. Use 2-3mm acrylic, wood, or metal panel.
Wiring: Connect the microswitch terminals to your encoder or PCB. Common ground shared across all buttons. Quick-disconnect (0.110") terminals are standard on Japanese buttons.
尺寸
故障排除
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
快速规格
- Actuation Force
- Depends on switch
- Diameter
- 30mm
- Mechanical Life
- Depends on switch
- Microswitch Type
- Hot-swap MX-compatible
- Mounting Type
- Snap-in
用户评价
“GamerFinger invented the MX-compatible arcade button before Qanba Gravity existed. Hot-swap any Cherry MX, Gateron, or Kailh switch into a 30mm arcade button. The original that proved mechanical keybo”