GF-HBFS-30
AktiivneGamerFinger HBFS-30 MX-Compatible Button
GamerFinger HBFS-30 — the original MX-compatible arcade button.
Tüüpilised rakendused
GamerFinger invented the MX-compatible arcade button before Qanba Gravity existed. Hot-swap any Cherry MX, Gateron, or Kailh switch into a 30mm arcade button. The original that proved mechanical keyboard switches work great in arcade applications. Limited production runs make these collector items.
Spetsifikatsioonid
|
Actuation Force
The force needed to press the button. Lower = more sensitive. Sanwa ~65g (light), Seimitsu ~85g (medium), Happ ~130g (heavy).
|
Depends on MX switch (~45g w/ Cherry MX Silver)
|
|
Body
|
Hollow body, vibration-damping (~20 dB noise reduction)
|
|
Color
Button/actuator color. Green = start/go, Red = stop/emergency, Yellow = caution, Blue = reset (per IEC 60204-1).
|
Crystal (translucent) or Black
|
|
Diameter
|
30mm
|
|
Mechanical Life
How many press cycles before mechanical failure. Higher is better — 10M cycles at 100 presses/day = 274 years.
|
Depends on switch (Cherry MX tens of millions of cycles)
|
|
Microswitch Type
The internal switch mechanism. Built-in = sealed unit. Cherry D44X = replaceable, clicky. Omron = quieter, longer life.
|
Hot-swap Cherry MX keyswitch (user-installed)
|
|
Mounting Type
How the button attaches to the panel. Panel mount is standard — installs through a cutout from the front.
|
Snap-in (buckle) or screw-in (G3)
|
Paigalduse kiirjuhend
Mounting: Snap-in buttons push into a 30mm hole from the top of the panel. Screw-in buttons thread from below and secure with a nut. Use 2-3mm acrylic, wood, or metal panel.
Wiring: Connect the microswitch terminals to your encoder or PCB. Common ground shared across all buttons. Quick-disconnect (0.110") terminals are standard on Japanese buttons.
Mõõtmed
Veaotsing
Not responding to input
Check wiring continuity with a multimeter. Verify the contact block is properly seated. Inspect terminals for loose connections.
Kust osta
Hinnavahemik
$18.85 — $75.42
2 edasimüüja juures
Kiirspetsifikatsioonid
- Actuation Force
- Depends on MX switch (~45g w/ Cherry MX Silver)
- Body
- Hollow body, vibration-damping (~20 dB noise reduction)
- Color
- Crystal (translucent) or Black
- Diameter
- 30mm
- Mechanical Life
- Depends on switch (Cherry MX tens of millions of cycles)
Mida kasutajad ütlevad
“GamerFinger invented the MX-compatible arcade button before Qanba Gravity existed. Hot-swap any Cherry MX, Gateron, or Kailh switch into a 30mm arcade button. The original that proved mechanical keybo”