Fuji Electric · AR22 系列

AR22F0R-10Y

在产
JIS UL CE

AR22 22mm Yellow Flush Push Button 1NO

Fuji Electric AR22 系列 Introduced circa 2000

Fuji AR22 yellow.

常见应用

Yellow for caution functions on Fuji panels.

规格参数

Actuator Type
Flush
Certifications
JIS, UL, CE
Color
Yellow
Contact Configuration
1NO
Cutout Diameter
22mm
IP Rating
IP65

安装快速参考

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

尺寸

Front 22mm cutout panel hole diameter Side panel contact ~45mm depth

接线图

L T 11 12 NO (open) press ↓

故障排除

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

购买渠道

价格范围

$15.1 — $123.46

来自 2 家经销商

快速规格

Actuator Type
Flush
Certifications
JIS, UL, CE
Color
Yellow
Contact Configuration
1NO
Cutout Diameter
22mm

用户评价

+

“Yellow for caution functions on Fuji panels.”

Reddit r/PLC 7 点赞 查看讨论 →