Fuji Electric · AR22 Series

AR22F0R-10B

Active
JIS UL CE

AR22 22mm Blue Flush Push Button 1NO

Fuji Electric AR22 Series Introduced circa 2000

Fuji AR22 blue.

Common Applications

Blue for reset on Fuji panels.

Specifications

Actuator Type
Flush
Certifications
JIS, UL, CE
Color
Blue
Contact Configuration
1NO
Cutout Diameter
22mm
IP Rating
IP65

Installation Quick Reference

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Dimensions

Front 22mm cutout panel hole diameter Side panel contact ~45mm depth

Wiring Diagram

L T 11 12 NO (open) press ↓

Troubleshooting

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Where to Buy

Price range

$66.06 — $101.62

across 2 distributors

Quick Specs

Actuator Type
Flush
Certifications
JIS, UL, CE
Color
Blue
Contact Configuration
1NO
Cutout Diameter
22mm

What People Are Saying

+

“Blue for reset on Fuji panels.”

Reddit r/PLC 42 upvotes View thread →