Eaton · M22 系列

M22-DP-Y

在产
UL CSA CE

22mm Yellow Mushroom Palm Button

零件编号: M22 - DP - Y
Eaton M22 系列 Introduced circa 2000

Eaton M22 40mm yellow mushroom button for two-hand control.

常见应用

Yellow palm button for two-hand safety systems on presses and shears. Both buttons must be pressed simultaneously within 0.5s per EN 574. Prevents operator from reaching into the press opening. The yellow color means caution/intervention.

规格参数

Actuator Function
Momentary
Actuator Type
Mushroom 40mm
Certifications
UL, CSA, CE
Color
Yellow
Cutout Diameter
22.5mm
IP Rating
IP67 (front)
Series
M22

安装快速参考

Panel cutout: 22.5mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

尺寸

Front 22.5mm cutout panel hole diameter Side panel contact ~45mm depth

故障排除

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

快速规格

Actuator Function
Momentary
Actuator Type
Mushroom 40mm
Certifications
UL, CSA, CE
Color
Yellow
Cutout Diameter
22.5mm

用户评价

+

“Yellow palm button for two-hand safety systems on presses and shears. Both buttons must be pressed simultaneously within 0.5s per EN 574. Prevents operator from reaching into the press opening. The ye”

Reddit r/PLC 17 点赞 查看讨论 →