Eaton · M22 系列

M22-D-G-K10

在产
UL CSA CE

M22 Green Complete Push Button 1NO

零件编号: M22 - D - K10
Eaton M22 系列 Introduced circa 2000

Eaton M22 complete green push button with 1NO contact.

常见应用

Complete assembly — head, body, 1NO contact block included. Same M22 quality, pre-built convenience.

规格参数

Actuator Type
Flush
Certifications
UL, CSA, CE
Color
Green
Contact Configuration
1NO
Cutout Diameter
22.5mm
IP Rating
IP67 (front)
Series
M22

安装快速参考

Panel cutout: 22.5mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

尺寸

Front 22.5mm cutout panel hole diameter Side panel contact ~45mm depth

接线图

L T 11 12 NO (open) press ↓

故障排除

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

快速规格

Actuator Type
Flush
Certifications
UL, CSA, CE
Color
Green
Contact Configuration
1NO
Cutout Diameter
22.5mm

用户评价

“Complete assembly — head, body, 1NO contact block included. Same M22 quality, pre-built convenience.”

Reddit r/PLC 14 点赞 查看讨论 →