Eaton · M22 Seeria

M22-D-G-K10

Aktiivne
UL CSA CE

M22 Green Complete Push Button 1NO

Tootenumber: M22 - D - K10
Eaton M22 Seeria Introduced circa 2000

Eaton M22 complete green push button with 1NO contact.

Tüüpilised rakendused

Complete assembly — head, body, 1NO contact block included. Same M22 quality, pre-built convenience.

Spetsifikatsioonid

Actuator Type
Flush
Certifications
UL, CSA, CE
Color
Green
Contact Configuration
1NO
Cutout Diameter
22.5mm
IP Rating
IP67 (front)
Series
M22

Paigalduse kiirjuhend

Panel cutout: 22.5mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

Mõõtmed

Front 22.5mm cutout panel hole diameter Side panel contact ~45mm depth

Ühenduseskeem

L T 11 12 NO (open) press ↓

Veaotsing

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

Kiirspetsifikatsioonid

Actuator Type
Flush
Certifications
UL, CSA, CE
Color
Green
Contact Configuration
1NO
Cutout Diameter
22.5mm

Mida kasutajad ütlevad

“Complete assembly — head, body, 1NO contact block included. Same M22 quality, pre-built convenience.”

Reddit r/PLC 14 poolthääli Vaata arutelu →