ALF4LB-110

在产

Altech ALF4LB-110

Altech ALF4LB-110 — Altech ALF4LB-110

系列图片:卖家将其用于2个其他部件,因此可能不显示此确切版本。

Switch Actuators 30mm Illum Flush RED 110VAC/DC Momentary

研究笔记

1. What this is

ALF4LB-110 is an Altech component — series not recognized.

2. Part-number decode

  • Series: Altech Altech (series not recognized)

3. Compatibility & ordering

Altech 22/30mm pushbuttons are cost-effective IEC-style panel operators. Match by size (22mm), operator material (metal vs plastic), illumination (and voltage), action, and contact blocks; cross-reference to Schneider Harmony, Allen-Bradley 800F, Siemens 3SU, or Eaton M22 by the same attributes if needed.

4. Data-quality note

The exact Altech series/configuration could not be confidently decoded from this part number. Kept and documented; flagged needs-verification rather than guessed.

5. Sources

  • Altech Corp datasheet / 22mm pushbutton tech specs (altechcorp.com)
  • Distributor listing (Mouser / Future Electronics) — search the exact part number

来源
  1. Altech Corp — ALF4LB-110 — altechcorp.com

规格参数

Enriched by
altech-decoder-2026-08-12
Lead time
0 Days
Manufacturer series
Altech (series not recognized)
Mouser part number
845-ALF4LB-110
Pn status
needs-verification
Rohs status
RoHS Compliant
Series description
Altech Corp industrial control component — exact series/config could not be decoded from this part number; kept and flagged for verification rather than guessed

安装快速参考

Panel cutout: 22mm. Insert from the front of the panel, secure with mounting nut from behind (tighten to 2-3 Nm).

Contact block: Snap or screw the contact block onto the rear of the button body. Ensure the contact block orientation matches the wiring diagram — NO terminals are usually marked.

Wiring: Use 0.5-2.5mm² stranded wire with ferrules. Tighten screw terminals to 0.8 Nm. Test the button function before energizing the circuit.

尺寸

故障排除

Button doesn't respond when pressed

Check the contact block first — it's the most common failure point. Test continuity across the NO or NC terminals with a multimeter. If no click is felt, the return spring in the head may be broken.

Works intermittently

Contact block contacts are pitted or burned. Replace the contact block — don't try to file the contacts. Check if the rated cycle count has been exceeded.

Button feels mushy or doesn't click

The spring return mechanism in the button head is worn. Replace the head. The contact block can usually be reused if it tests OK.

照片与图纸

图片:mouser.com

快速规格

Enriched by
altech-decoder-2026-08-12
Lead time
0 Days
Manufacturer series
Altech (series not recognized)
Mouser part number
845-ALF4LB-110
Pn status
needs-verification